Perko 0626 LED Horizontal Mount Side Lights, Red/Green, 12V, 2nm, Stainless Steel, Pair

Overview

The Perko 0626DP0STS is a pair of red and green LED horizontal mount side navigation lights for power-driven vessels under 20 meters, or 65.6 feet. Each light uses a 12 Volt LED module with a 2.5 watt draw and 0.21 amp current, giving boat owners a low-profile replacement or upgrade for compliant port and starboard side lighting.

The lights have a polished stainless steel top with a black polymer base, so they suit exposed deck, bow, and cabin-side mounting areas where spray, sun, and vibration are part of normal use. They are USCG 2 nautical mile certified and meet ABYC C-5, ABYC A-16, EN/ISO 19009:2015, 1972 COLREGS, RCD 2013/53/EU, and USCG 33 CFR requirements.

With compact 2-1/2 inch x 2-3/4 inch x 1 inch housings, these side lights make sense for center consoles, runabouts, fishing boats, and small cruisers that need a clean horizontal-mount layout without moving to a larger fixture.

Key features

• Pair of red and green horizontal mount LED side lights for port and starboard navigation lighting.
• Certified for power-driven boats under 20 meters, or 65.6 feet, in USA and European markets.
• USCG 2 nautical mile certified for required side light visibility.
• 12 Volt LED operation with 2.5 watt power use and 0.21 amp current draw.
• Polished stainless steel top and black polymer base for a clean look on exposed mounting surfaces.
• Low-profile housing measures 2-1/2 inch x 2-3/4 inch x 1 inch.
• Uses #6 mounting screws for installation.
• Same footprint perimeter as Perko 0615 and 0616 LED lights, although wiring hole and screw locations may vary.
• Meets ABYC C-5, ABYC A-16, EN/ISO 19009:2015, 1972 COLREGS, RCD 2013/53/EU, and USCG 33 CFR standards.

Installation and fit

These lights are made for horizontal mounting, so they belong on flat or suitably prepared surfaces where the port and starboard lenses can show the correct navigation sectors without obstruction. Before replacing older Perko 0615 or 0616 LED lights, check the existing wiring hole and screw locations against the new fixture, since the footprint perimeter is similar but the mounting details may not be identical.

The compact housing helps when space is limited near bow rails, anchor lockers, rub rails, or deck hardware. Use the correct #6 fasteners for the mounting surface and bed the installation properly for the location, especially on cored decks or areas exposed to regular washdowns.

Electrical and compliance

This is a 12 Volt LED light set, so it is suited to standard 12V DC boat electrical systems. The LED modules keep current draw low, which is useful on smaller boats where navigation lights may run for long periods during evening returns, early departures, or low-visibility conditions.

The 2 nautical mile certification and listed marine lighting standards matter for owners replacing faded, cracked, or outdated side lights. Correct mounting height, orientation, wiring protection, and switch labeling are still part of the installation, so the final setup should be checked as a complete navigation light system rather than as the fixture alone.

What’s included

• Pair of LED horizontal mount side lights.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.