Lumitec Halo LED Downlight, Blue/White Light, Dimming, IP67, 10-30V

Overview

The Lumitec 112821 is a flush-mount LED down light with blue output and a 5000K white mode that dims, built for 10 to 30VDC boat systems. White mode produces 150 lumens from a 4W draw, and the sealed housing is IP67 compliant for wet locations.

Its shallow profile keeps the back of the fixture under 1/2 in behind the panel, which helps in tight headliners and hard tops. The trim is finished in white and the light is certified ignition protected, so it can be used in spaces where fuel vapors may be present when installed correctly.

Key features

• 10 to 30VDC input for 12V and 24V nominal systems
• White and blue output, with dimming on white mode using a standard SPST switch
• 150 lumens on white mode; 5000K CCT and 70+ CRI
• 4W rated power draw; up to 300mA at 12VDC and 160mA at 24VDC
• Fully sealed, IP67 compliant for washdowns and exposed mounting locations
• Certified ignition protected for installation where fuel vapors may be present
• Shallow mounting depth under 1/2 in behind the mounting surface
• Overall dimensions: 1.99 in x 1.99 in x 0.70 in

Installation and setup

Mounting uses a screw-on plate and a twist-lock body. Cut the opening using the supplied template, secure the plate, connect to vessel DC power, then rotate the light until it clicks into the plate.

The light is polarity sensitive. Verify DC negative and DC positive before energizing, and fuse the circuit based on the total load of the lights on that switch.

The fixture is fully sealed for interior and exterior mounting, but it is not intended for permanent underwater installation.

Switching and dimming control

The built-in control works from a standard SPST on-off switch. Turn the switch off and back on quickly to move between white and blue.

When the light is on white, the output ramps slowly. Turn the switch off and back on at the brightness you want to hold that dim level, then use another quick off-on cycle to switch to blue after dimming is set.

Fit and on-board use

With a small, square face and a low-profile mount, it fits well in cabins, salons, helm overhangs, and exterior hard tops where you want a flush look and no exposed fasteners.

It is a good match for boats that want white light for normal use and blue for night running or cockpit work, while keeping wiring simple on a single switch circuit. If you are replacing older halogen downlights and need to cover a larger existing opening, a retrofit adapter kit is available for holes from 1.875 in to 2.750 in.

What's included

• Halo flush-mount down light with white finish and blue plus dimmable white output
• Mounting screws
• Yellow rubber installation tool

Regulatory notice

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov.

• 1260252_qbp739751.pdf
• 1309407_qbp739751.pdf

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.