Lopolight Starboard Navigation Light, LED, 1 NM, Vertical Mount, 10-32VDC, IP68, 6 m Cable

Overview

The Lopolight 101-001 Series is a 1 NM starboard sidelight with a 112.5° green sector for vertical mounting on vessels up to 12 m (39.4 ft). It runs on 10-32 VDC so it fits both 12V and 24V systems, and these configurations come prewired with a 6 m shielded marine-grade cable for longer runs.

The housing is anodized aluminum with a PMMA lens and A4 stainless steel screws, and the unit is sealed to an IP68 rating for wet decks and washdowns. Power draw is 1.1 W (about 66 mA at 12V, 34 mA at 24V), and the body measures 92.5 x 28 x 49.7 mm.

Key features

• Starboard sidelight with green output and a 112.5° sector for COLREG72 running light requirements
• 1 NM visibility rating for vessels under 12 m (39.4 ft)
• 10-32 VDC input range for 12V or 24V electrical systems
• IP68 sealing for heavy spray, rain, and washdowns
• Anodized aluminum body with PMMA lens and A4 stainless steel screws
• Low electrical load: 1.1 W (66 mA at 12V, 34 mA at 24V)
• Compact footprint: 92.5 x 28 x 49.7 mm
• Operating temperature range: -25°C to 55°C
• Approved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, LR

Variants

This light is offered in two finish options, both supplied with the extended 6 m cable.

The listed difference between these configurations is the housing finish.

• 101-001 6M: Finish Silver. Blends well with stainless rail hardware and natural aluminum trim.
• 101-001-B 6M: Finish Black. Sits quieter against dark window frames, hardtops, and painted cabin sides.

Installation and setup

Mount the light on the starboard side on a vertical surface where the 112.5° sector stays clear. Before drilling, check sight lines from ahead and abeam so rails, canvas, bow rollers, or fenders do not block the light sector.

Route the attached cable to a dry connection point and leave a small service loop so the light can be removed for service without cutting wiring.

Electrical and system integration

Connect to your navigation light circuit on 10-32 VDC. Minimum feed wire gauge is 0.5 mm2 (AWG 22); for long runs, step up wire size to manage voltage drop, especially on 12V systems.

The attached shielded cable is helpful when the run passes near other onboard wiring and when you want a clean pull through conduits and lockers.

Use cases on board

This is a good match for smaller powerboats, sailboats, and tenders that need a compact starboard sidelight on a cabin side, deckhouse, or a vertical face near the bow. It also suits refits where you want LED navigation lighting with low draw and a sealed housing for year-round exposure.

What's included

• Navigation light with 6 m shielded marine-grade cable attached
• Installation guide

• 1321149_qbp611763.pdf

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.