Lopolight 200-018 Series 180° Green Navigation Light, 2NM, Vertical Mount, 10-32VDC, IP68
Got questions? Ask an expert!
Know someone who needs this?
Share it with your crew or mechanic.
Overview
The Lopolight 200-018 Series is a 2 NM, 180° green navigation light that mounts vertically on a flat surface. It is sized 104 mm x 37 mm x 45 mm, which makes it a practical fit for cabin sides, pilothouse fronts, and other vertical faces where you need a clean, low-profile install.
It runs on 10-32 VDC (12V or 24V systems) and draws about 145 mA at 12 VDC or 60 mA at 24 VDC (1.5 W). The light is IP68 rated and fully potted, so it holds up well in wet locations and in areas that see vibration.
The housing is anodized aluminum with a PMMA lens and A4 stainless steel screws. This series is rated for vessels up to 50 m (164 ft) and is approved for use as a navigation light under common marine standards.
Key features
- 2 NM visible range with a 180° green sector for navigation-light applications
- Vertical mounting format with compact overall size (104 mm x 37 mm x 45 mm)
- 10-32 VDC input for 12V and 24V systems; typical draw 145 mA at 12 VDC or 60 mA at 24 VDC (1.5 W)
- IP68 rating with fully potted electronics for wet installs and vibration-prone mounting points
- Anodized aluminum housing with PMMA lens and A4 stainless steel fasteners
- Minimum feed wire gauge listed as 0.5 mm2 (AWG 22)
- Offered with extended factory cable lengths (6 m or 20 m) to reduce splices and junctions
- Style options include a single-light version (Single Stack) and a double-light version (Double Stack)
Variants
This series is offered with either a silver anodized finish or a black anodized finish, and with factory-attached cable lengths of 6 m or 20 m.
Style options are shown as Single Stack and Double Stack. Single Stack refers to the single-light configuration, while Double Stack refers to the double-light configuration in the same vertical-mount format.
What’s included
- Navigation light
- Installation guide
Installation and setup
Plan the mounting location so the 180° sector is aimed the way your navigation-light layout requires. On most boats this means taking a moment to mark the centerline and confirming the light sits truly vertical before final tightening.
For the cleanest install, route the cable through the mounting surface where possible and seal any penetrations appropriately for the material you are mounting to. If the cable will be spliced or extended, keep the connection accessible and protected from standing water.
Electrical and system integration
This light is suited to both 12V and 24V DC systems across a 10-32 VDC input range. With long cable runs, size the supply wiring for voltage drop as well as current draw, and terminate the shielded cable carefully so the installation stays quiet and tidy around sensitive electronics.
Materials and corrosion resistance
The anodized aluminum body and stainless hardware are a good match for exposed installations, including coastal and offshore use. Regular rinse-down after saltwater runs helps keep the finish looking clean and prevents salt buildup around fasteners and cable exits.
Use cases on board
This light is commonly installed on yachts, sportfishers, and workboats where a vertically mounted 180° green sector is required on the superstructure. It is also a good match for refits where you want an IP68-rated unit and the option of a 20 m cable to reach a central electrical panel without adding extra junction boxes.
Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.
Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.
Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.
Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.
Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.
Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.
To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.
We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.
