Lopolight 360° Green Navigation Light, 2nm, Horizontal Mount, IP68
Got questions? Ask an expert!
Know someone who needs this?
Share it with your crew or mechanic.
Overview
The Lopolight 201-015 is a 2 NM, 360° green LED navigation and signal light for horizontal mounting on an FB flat base.
It runs on 10-32 V DC for common 12 V and 24 V systems and draws 2.1 W. The housing is IP68-rated for exposed mounting points and is specified for operation from -25°C to 55°C.
The body measures Ø92.5 mm, and overall height depends on the stack style: 36 mm for single stack or 58 mm for double stack. Construction uses anodized aluminum with a PMMA lens and A4 stainless steel screws, and the light comes pre-cabled with a 0.75 m shielded marine-grade cable.
Key features
- 2 NM visibility with a 360° green light output
- Operating voltage: 10-32 V DC
- Power draw: 2.1 W
- IP68 ingress protection for open-deck and superstructure mounting locations
- Ø92.5 mm body diameter; 36 mm (single stack) or 58 mm (double stack) height
- Materials: anodized aluminum housing, PMMA lens, A4 stainless steel screws
- Pre-cabled with a 0.75 m shielded marine-grade cable
- Operating temperature: -25°C to 55°C
- Minimum feed wire gauge: 0.5 mm2 (AWG 22)
- Approved to COLREG72, EN14744, IEC 60945, IACS E10, and USCG
Variants
This light is offered in two finishes and in single or double stacked styles.
Across the range, the light output stays 2 NM, 360° green with horizontal mounting, a 10-32 V DC input range, and an IP68 rating. Finish and stack style change the appearance and overall height.
- 201-015-FB (Finish Silver, Single Stack). Lower overall height when clearance is limited under overhangs, antennas, or rails.
- 201-015-FB-B (Finish Black, Single Stack). Same low-profile form factor with a black anodized look that blends into dark hardware and topside structures.
- 201-015ST-FB (Finish Silver, Double Stack). Taller body with a double stacked layout when two green all-round lights are required at the same mounting point.
- 201-015ST-FB-B (Finish Black, Double Stack). Double stacked configuration in a black finish for installations where a taller signal light stack is needed without changing the mounting footprint.
Installation and setup
Plan the mounting location so the lens has an unobstructed 360° view. Rails, radomes, antennas, and the edge of a hardtop can mask the light if it sits too close or too low.
Route and secure the cable so it cannot chafe in vibration and so it stays clear of sharp edges. Bed fasteners and cable exits appropriately for the mounting surface, and isolate dissimilar metals when installing on aluminum structures.
Compatibility and use on board
This all-round green light is used in specific navigation and signal configurations where a green 360° light is required. It suits owners and installers who need a compact, sealed unit that can live on an exposed arch, mast, or superstructure without constant attention.
What's included
- Navigation light with pre-attached 0.75 m shielded cable
- Installation guide
Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.
Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.
Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.
Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.
Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.
Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.
To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.
We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.
