Hella Marine EuroLED 150 LED Downlight, 3000K Warm White, 9-33V DC

Overview

The Hella Marine EuroLED 150 is a warm white LED downlight for recessed mounting in overhead panels on board. It runs on Multivolt 9-33V DC (12V/24V nominal) and draws 4.0W, with a 3000K color temperature that reads as a comfortable, warm cabin light.

The lamp body is completely sealed for use in interior or exterior locations, wet or dry, and it is CE approved for recessed mounting. The trim diameter is 150 mm (5.90 in) with a 124 mm (4.88 in) cut-out and 20 mm (0.79 in) depth behind the panel, and the unit weighs about 245 g including the cable.

This is the non-touch version, so switching is handled by your existing circuit switch rather than a control pad on the lamp face. It comes pre-wired with 500 mm of twin or triple core marine cable for straightforward hook-up.

Key features

• Warm white LED output at 3000K with 4.0W power draw (less than 0.33A at 12V, less than 0.16A at 24V).
• Multivolt input range 9-33V DC for 12V and 24V systems.
• Recessed-mount footprint: 150 mm overall trim diameter, 124 mm cut-out, 20 mm depth behind the mounting surface.
• Completely sealed construction for interior or exterior use, including damp and exposed areas.
• Lens is made from UV resistant enhanced impact acrylic, with rim options in UV resistant plastic or 316 stainless steel.
• Low EMC noise to help avoid interference with onboard radio communications.
• Polarity conscious wiring with reverse polarity protection; protect the circuit with a fuse rated at 2A maximum.

Variants

The EuroLED 150 non-touch warm white lamp is offered with two rim materials to match the look of the cabin and the level of exposure.

The light color (3000K warm white), electrical range (9-33V DC), and recessed mounting footprint are the same across the variants; the rim material is what changes.

• 980631602: Rim material: Plastic. The plastic trim blends well with white liners and keeps the face simple in interior spaces.
• 980631612: Rim material: Stainless Steel (316). The stainless trim gives a polished finish that holds up well around spray and frequent wipe-downs.

Installation and fit

Plan the location with the 124 mm cut-out and 150 mm trim in mind, and check you have at least 20 mm of clear depth behind the headliner or panel for the lamp body and wiring. Because the unit is sealed, it works well in places that see moisture, but route the cable so water cannot track along it into splices or junction points.

Electrical and system integration

Connect red to DC positive and black to DC negative, and keep the lamp on a 2A (max) fused circuit. The electronics are built to handle the normal voltage swings seen on charging systems, and reverse polarity will stop the lamp from lighting without damaging it.

Materials and corrosion resistance

The lens material is UV resistant enhanced impact acrylic, which helps resist damage from vibration and regular cleaning. Choose the plastic rim when you want a white finish that disappears into liners, or the 316 stainless rim when you prefer a metal trim in exposed areas such as a cockpit hardtop or covered deck.

Use cases on board

This downlight is a good match for boaters who want warm, comfortable overhead lighting and prefer a sealed fitting that can be used in both interior spaces and protected exterior areas. It is commonly used in saloons, cabins, companionways, hardtops, and cockpit overhangs where a flush face stays out of the way.

Maintenance and care

Rinse with fresh water when needed and clean with mild soap and a soft cloth. Avoid abrasive cleaners on the acrylic lens and on polished stainless trims.

• 1297620_qbp592609.pdf
• 1311486_qbp592609.pdf

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.