Lumitec Perimeter LED Flood Light, 10-30V, IP67, 16W, 1000 Lumens

Overview

The Lumitec Perimeter Light is a low-profile LED flood/spreader light for lighting decks, spreaders, and perimeter areas on board. It runs on 10-30 VDC for 12V and 24V systems, draws 16W (about 1.3A at 12V), and puts out 1,000 lumens with a beam that spreads light wide across a work area.

The housing is sealed to an IP67 rating and uses an aluminum body with an impact-resistant plastic window. Overall size is about 6.36 in wide x 1.73 in high x 1.48 in deep, which helps when you are fitting lights under a hardtop, on a cabin side, or in tight service spaces. White output is 5000K with CRI 70+ for clear working light.

Key features

• 10-30 VDC input for 12V/24V boats and docks
• 16W load (about 1.3A at 12V and 600mA at 24V) for circuit planning
• 1,000 lumen output with a wide beam that spreads light evenly
• IP67 sealed housing for spray and washdowns
• Aluminum housing with an impact-resistant plastic window
• Low profile surface-mount footprint: about 6.36 in W x 1.73 in H x 1.48 in D
• White output rated 5000K with CRI 70+
• Over-temperature protection to reduce risk of overheating in enclosed locations
• CE certified

Variants

This light is offered with different light colors and housing finishes so you can match the way you use the area and the look of the boat.

Light color options include White, White/Blue, White/Red, and White/Amber. Finish options include White, Black, and Chrome. Control and wiring depends on the light color: White models are simple on/off, two-color dimming versions use timed on/off toggles to set intensity and change colors on a standard switch, and versions that include an amber flashing output use a 3-wire hookup with separate control of the white channel and the flashing circuit.

Installation and wiring

This is a surface-mount light. Plan a clean wire path behind the mounting surface, drill a 1/4 in wire exit hole, and pre-drill for #6 mounting screws. Bed the fixture with marine sealant where it meets the mounting surface to keep water from tracking into the core or behind panels.

Feed the light from a switched and fused DC supply and size the fuse for the circuit load, especially when multiple lights share one run. Two-wire dimming models ramp up on startup and use brief off/on toggles to set a dimmed level and change colors. Flashing-output models use separate conductors for the white channel and the flashing channel, typically wired to a 3-way on/off/on switch or two separate on/off switches.

Compatibility and fit

The wide beam pattern is helpful when the light is mounted about 3 to 4 feet above the surface you want to illuminate, such as along cabin sides, under hardtops, on arches, or inside machinery and storage areas where overhead mounting space is limited. It is intended for above-water use in wet, exposed areas where sealing and vibration resistance matter.

Use cases on board

Common installs include cockpit and side-deck work lighting, spreader lighting on a sailboat, transom and boarding-area illumination, and overhead service lighting in compartments. This product is a good match when you want a wide, even wash of light close to the mounting surface and you need a fixture that can handle spray and regular washdowns.

• 1297740_qbp213371.pdf

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.