Perko 1319 Polymer Vented Deck Fill, 1-1/2 in Fill Hose, 5/8 in Vent Hose, Straight Neck

Overview

The Perko 1319 is a vented straight-neck deck fill for boats using 1-1/2 inch fill hose and 5/8 inch vent hose. It combines the fill point and tank vent in one deck-mounted fitting, which helps keep the deck layout cleaner where space around the fuel or water fill is limited.

The polymer body is available in black or white, with a flip-top cap marked for either gas or water. The straight neck has a 2-7/16 inch neck length, uses #10 mounting screws, and is suited to installations where the hose run can drop cleanly below the deck without the offset of an angled-neck fitting.

Key features

• Vented straight-neck deck fill for 1-1/2 inch fill hose and 5/8 inch vent hose.
• Integral tank vent with flame arrestor on gas-marked versions.
• Flip-top cap gives quick access without a separate deck plate key.
• No ground wire required, which simplifies installation compared with metal fuel fills that need bonding.
• Black or white polymer options let the fitting match common deck and cockpit finishes.
• Uses #10 screws for deck mounting.
• Gas-marked versions meet U.S.C.G. Safety Standards for gasoline fuel systems under 33 CFR 183, but they are not for 40 CFR 1060 subpart B emissions-compliant fuel systems.

Variants

This Perko 1319 deck fill is offered in gas-marked and water-marked configurations, with black and white finish options across the range.

The hose sizes, straight-neck layout, flip-top cap, polymer construction, 2-7/16 inch neck length, and #10 screw mounting remain consistent across the listed variants. The visible deck marking and finish are the main selection points.

• 1319DPGBLK: Marked for Gas, Size 4.7/13.5. This black version suits fuel-fill locations where a dark deck fitting matches nearby hardware or trim.
• 1319DPGWHT: Marked for Gas, Size 4.7/14.1. This white version suits fuel-fill locations on lighter decks, cockpits, and transoms.
• 1319DPWBLK: Marked for Water, Size 4.7/14.0. This black version identifies the fill point for the onboard freshwater system while keeping the same vented straight-neck layout.
• 1319DPWWHT: Marked for Water, Size 4.7/13.9. This white version gives a clear water marking for freshwater fill points on light-colored deck surfaces.

Installation and fit

Check the deck thickness, hose routing, and space below the mounting area before fitting this deck fill. The straight-neck body works best where the fill hose and vent hose can be led downward without a sharp bend, which is important for clean filling and proper venting.

Use hose that matches the 1-1/2 inch fill connection and 5/8 inch vent connection, and bed the flange with a sealant suitable for the deck material and the liquid system being serviced. The cap marking should face a direction that stays easy to read during fueling or filling at the dock.

Use cases on board

This fitting is a practical match for small and mid-size boats that need a combined fill and vent on deck for gasoline or freshwater service. It is especially useful on consoles, cockpit coamings, side decks, and transom areas where a separate tank vent would add another fitting through the hull or deck.

For gasoline systems that must comply with modern evaporative-emissions requirements, confirm the full fuel-system specification before installation. This series is not intended for 40 CFR 1060 subpart B emissions-compliant applications.

• 1337239_qbp506565.pdf

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.