Perko 0300 Surface Mount Dome Light, 12V, Chrome Plated, Clear Polymer Lens

Overview

The Perko 0300 is a surface-mount dome light for boat interiors, available in three base and lens sizes with a polished chrome finish. It uses a clear polymer lens, a double-contact bayonet socket, and a push switch with a water-resistant boot, making it a practical cabin, berth, head, galley, or covered cockpit light where a low-profile round fixture is preferred.

This incandescent dome light ships with a 12V bulb and is also used in 24V and 32V installations when fitted with the proper replacement bulb for that system. Across the range, the base sizes run from 3-3/4 inches to 6 inches, with overall depths from 1-1/2 inches to 2 inches, so the right version depends on both the light spread needed and the available mounting space overhead or on a vertical surface.

Key features

• Surface-mount round dome light for marine interior spaces such as cabins, berths, heads, galleys, companionways, and covered helm areas.
• Polished chrome-plated zinc alloy housing with a clear polymer lens for a traditional brightwork look inside the boat.
• Double-contact bayonet socket for incandescent bulb service and straightforward bulb replacement.
• Push switch includes a water-resistant boot for easier control in damp cabin and cockpit environments.
• Black vinyl mounting gasket helps the fixture sit cleanly against the mounting surface.
• Supplied for 12V use with bulb wattage and maximum wattage varying by size.

Variants

This dome light is offered in three size configurations. The base diameter, lens diameter, depth, bulb wattage, maximum wattage, and screw size vary by version.

The polished chrome finish, clear polymer lens, double-contact bayonet socket, black vinyl mounting gasket, and push switch with water-resistant boot remain consistent across these configurations.

• 0300DP0CHR: 3-3/4-inch base with 3-inch lens. This is the smallest version, with a 1-1/2-inch overall depth, a 7W supplied bulb, an 11W maximum wattage, and #10 round-head screw mounting.
• 0300DP1CHR: 5-inch base with 4-inch lens. This mid-size version has a 1-7/8-inch overall depth, an 11W supplied bulb, a 17W maximum wattage, and #10 round-head screw mounting.
• 0300DP2CHR: 6-inch base with 5-inch lens. This is the largest version, with a 2-inch overall depth, a 17W supplied bulb, a 17W maximum wattage, and #12 round-head screw mounting.

Installation and fit

Because this is a surface-mount fixture, it is suited to flat interior mounting areas where cutting a large recess is not desired. Check the base diameter, overall depth, and screw size before replacing an older dome light, especially on headliners, wood trim, fiberglass liners, and bulkheads where existing holes may need to line up cleanly.

For electrical work, match the bulb to the vessel system voltage and protect the circuit according to the boat’s existing lighting layout. The supplied bulb is for 12V service, while 24V or 32V systems require the correct bulb for that voltage before the light is put into use.

Use cases on board

This fixture suits owners restoring classic interiors, replacing worn cabin lights, or adding a chrome-finished dome light in areas where a switched incandescent fixture is still preferred. The larger sizes make sense where a broader lens and higher wattage are useful, while the smallest version works well in tighter spaces where overhead clearance and base diameter matter.

Maintenance and care

Use a soft cloth and mild cleaner on the chrome-plated surface and lens. Avoid abrasive pads or harsh chemicals, since they can dull the finish and mark the polymer lens over time. Periodic checks of the switch boot, mounting screws, gasket, and bulb contact area are worthwhile on boats that see frequent humidity, salt air, and vibration.

What’s included

• Surface-mount dome light assembly
• Clear polymer lens
• Black vinyl mounting gasket
• Push switch with water-resistant boot
• 12V bulb

• 1337219_qbp505651.pdf
• 1337220_qbp505651.pdf
• 1337221_qbp505651.pdf

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.