MotorGuide Xi Series Trolling Motor Foot Pedal, Wireless 2.4GHz

Overview

The MotorGuide 8M0092069 is a 2.4 GHz wireless foot pedal for Xi series electric steer trolling motors, including Xi3 and Xi5 models. The heel-toe steering layout lets you turn right with toe-down and left with heel-down, then stop the turn by letting the pedal return to the center detent. Steering range allows you to rotate the motor past 360 degrees in either direction, which is handy when you are lining up on structure or following a contour.

Speed is set with the dial on the pedal, with both momentary run and constant on/off control at the selected speed. The pedal runs on two AA alkaline batteries and syncs to the motor receiver, so it can be placed where your feet naturally land on a casting deck or bow platform without a cable run across the boat.

Key features

• 2.4 GHz wireless foot control for compatible MotorGuide Xi series motors (Xi3 and Xi5)
• Heel-toe steering with a center detent to stop turning without hunting for a switch
• Steering range that can rotate the motor past 360 degrees in either direction
• Speed control dial plus both momentary run and constant propeller on/off at the selected speed
• Anchor button control on motors with GPS installed, and it also functions as the pedal on/off control
• Receiver can sync up to 40 wireless controllers for multi-control setups
• Uses two AA alkaline batteries with a gasketed cover to help keep the battery compartment sealed

Compatibility and fit

This pedal is intended for MotorGuide Xi series motors that support wireless controllers. It is commonly used with Xi3 and Xi5 models and communicates through the motor’s receiver once it is synced, so there is no hardwired foot pedal connection to route through the deck. If your boat runs multiple wireless controls, the receiver can store many devices, which is useful when you want both a foot pedal and other controls on board.

Installation and setup

Syncing is done at power-up. After connecting the trolling motor to its power source, press and hold the propeller and anchor buttons on the pedal within ten seconds, then listen for the multi-tone beep that confirms the receiver learned the pedal. When activating more than one pedal, unplug the motor from power and plug it back in between each device activation.

Battery access is under the cover secured by two screws. Replace with two AA alkaline batteries in the correct polarity and make sure the rubber seal is seated before reinstalling the cover.

Use cases on board

This setup makes sense for anglers who want their trolling motor to respond while they are moving around the bow, working a rod locker, or landing a fish, since the pedal is not tied to a fixed cable location. It is also a good match for boats where keeping the deck clear matters, such as bass boats, multispecies rigs, and open-bow skiffs with a busy casting area.

Safety and compliance

Rotating propellers can cause serious injury or death. Never start or operate the trolling motor out of water.

When activating the trolling motor with the foot pedal, the motor can start at the last selected speed and course settings. Before pressing the pedal, hold on to a seat or handhold and advise passengers to do the same.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.