JL Audio M6 VeX 6.5 in Enclosed Coaxial Speaker System, 75W RMS, 4 Ohm, Pair, Sport Grilles

Overview

The JL Audio VeX Enclosed Speaker System is a pair of 6.5-inch enclosed coaxial speaker pods for open-air audio on boats and powersports rigs where a traditional cut-in speaker does not make sense. Each pod is a 4 O system rated at 75 W RMS with a 100 Hz-25 kHz frequency response, and the enclosure footprint is 7.03 in (179 mm) in diameter by 6.16 in (156 mm) deep.

Each enclosure uses a rotating clamp receiver that works with tubular or surface-mount fixtures (sold separately), which is handy for placing speakers on a wake tower, T-top, hardtop, cockpit rail, or other structure and aiming them toward the seating area. The system is built to handle salt fog and UV exposure, which matters when it lives outside.

Some configurations add Transflective RGB LED accent lighting. The LED circuit runs on 10-14.4 VDC, so plan a separate lighting feed if you want the grilles to light up at night.

Key features

• Pair of 6.5-inch enclosed coaxial speaker pods (M6 VeX) for open-air mounting locations.
• 4 O impedance, 75 W RMS continuous power handling, and 100 Hz-25 kHz frequency response.
• Recommended amplifier power: 25-150 W per channel.
• Pod dimensions for clearance checks: 7.03 in (179 mm) diameter and 6.16 in (156 mm) depth.
• Rotating clamp receiver supports tubular and surface-mount installations with compatible fixtures (sold separately).
• Grille Color/Style options: White Sport or Titanium Sport.
• LED variants add Transflective RGB LED lighting powered by 10-14.4 VDC (max LED load 324 mA at 14.4 VDC).

Variants

This speaker system is offered in multiple configurations so you can match the grille finish and decide whether you want accent lighting.

Across the options listed here, the differences are the LED lighting choice and the Grille Color/Style.

• 010-03260-00: LED Lighting None; Grille Color/Style White Sport. A straightforward setup when you want the White Sport look without running a separate lighting circuit.
• 010-03263-00: LED Lighting None; Grille Color/Style Titanium Sport. Keeps wiring simple while giving you the Titanium Sport grille finish.
• 010-03262-00: LED Lighting Transflective RGB LED; Grille Color/Style White Sport. Adds a lighted accent ring and needs a 10-14.4 VDC supply for the LED circuit in addition to the speaker wiring.
• 010-03261-00: LED Lighting Transflective RGB LED; Grille Color/Style Titanium Sport. Combines the Titanium Sport grille finish with Transflective RGB LED accent lighting for nighttime visibility and ambience.

Installation and setup

Because the speaker is already housed in an enclosure, installation comes down to mounting and clean wiring runs. Use a compatible VeX mounting fixture for your surface or pipe diameter, tighten the clamp receiver, then set the aim before final torque so the pods point where they are most useful.

Allow room for the 7.03 in diameter body and 6.16 in depth, plus space for cable routing. On exposed mounts, a drip loop and sealed connections help keep water from tracking into the wiring.

Electrical and system integration

On the audio side, each pod presents a 4 O load and is rated for 75 W RMS continuous power. The recommended amplifier range is 25-150 W per channel, which fits most marine multi-channel amps when you want enough headroom without pushing the speakers beyond their rating.

For variants with Transflective RGB LED lighting, power the LEDs from 10-14.4 VDC and account for up to 324 mA at 14.4 VDC. Treat the lighting feed like any exterior accessory circuit with appropriate fuse protection, a switch or controller, and marine-grade terminations.

Use cases on board

This setup fits boats that need speakers mounted on a rail, tower, or hardtop, such as center consoles, wake boats, and RIBs. It also suits personal watercraft and other open rigs where you want sound aimed at riders without cutting into body panels.

What’s included

• Two VeX enclosures with marine coaxial loudspeakers and grilles installed
• Two aluminum logo caps (M6 models)
• One tube of silicone adhesive

Maintenance and care

Rinse off salt spray when you can and wash the grilles with mild soap and water. Avoid harsh solvents on the grille finish, and re-check mounting hardware periodically if the boat sees heavy vibration or frequent trailering.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.