Jabsco In-Line Non-Return Valves, For Pump Suction Hose

Overview

The Jabsco In-Line Non-Return Valve is an in-line check valve for marine bilge pump suction lines, used to help a pump prime and to stop water from running back into the bilge when the pump cycles off. The range covers 3/4 in (19 mm), 1 in (25 mm), and 1-1/2 in (38 mm) ID hose, matching common bilge and pump hose setups on small boats, cruisers, fishing boats, and refit projects.

Each valve fits directly into the pump suction hose, which keeps the installation straightforward when replacing a worn valve or adding backflow control to an existing bilge system. The construction uses corrosion-resistant materials throughout, with a plastic body and a nitrile rubber valve for wet bilge environments where standing water, salt residue, and vibration are part of normal service.

Key features

• Fits into a pump suction hose to help priming and reduce water draining back into the bilge.
• Available for 3/4 in (19 mm), 1 in (25 mm), and 1-1/2 in (38 mm) ID hose connections.
• Corrosion-resistant materials throughout for use in damp bilge spaces and marine plumbing runs.
• Plastic construction with a nitrile rubber valve for a simple non-return function in bilge pump systems.
• Adjustable port configuration helps the hose angle sit more naturally during installation.

Variants

This product is offered in three hose-size configurations for different bilge pump suction lines.

The hose connection size changes between variants. The in-line non-return function, suction-line placement, corrosion-resistant construction, plastic body, nitrile rubber valve, and adjustable port configuration remain consistent across the range.

• 29295-1011: Hose size 3/4 in (19 mm) ID hose. This size suits smaller bilge hose runs where the pump and plumbing use 19 mm hose.
• 29295-1000: Hose size 1 in (25 mm) ID hose. This size matches 25 mm bilge hose installations and is a common fit for mid-size pump plumbing.
• 29295-1010: Hose size 1-1/2 in (38 mm) ID hose. This size is for higher-capacity bilge hose layouts that use 38 mm suction hose.

Installation and fit

Install the valve in the suction line where it can sit in line with the hose and remain accessible for inspection. Match the variant to the inside diameter of the existing hose, not the outside diameter, and use hose clamps that are suitable for the hose and bilge environment.

Because the port angle can be adjusted, the valve is useful in tight bilge compartments where hose routing may need to clear pumps, stringers, tanks, or other plumbing. A smooth hose run with fewer hard bends helps the pump maintain better suction.

Use cases on board

This valve is a practical match for boats where bilge water can drain back toward the pickup or where the pump needs help holding prime between cycles. It is especially relevant for maintenance work on manual or electric bilge pump suction lines, replacement plumbing, and refits where the hose size is already known.

Maintenance and care

During bilge inspections, check that the valve and hose clamps are secure and that debris has not collected around the suction side of the system. If the bilge has been exposed to oil, heavy dirt, or loose debris, inspect the valve as part of the pump service routine so the non-return function stays dependable.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.