Lumitec Contour LED Anchor Light, 24 in, White Shaft and Base, 10-30V, USCG 2NM, Locking Retractable Base

Overview

The Lumitec 101694 is an all-round LED anchor light with a 24 in white shaft and a white base for mounting on a hardtop, radar arch, or cabin roof. It runs on 10-30 VDC and draws 80 mA at 12V or 45 mA at 24V (0.9W), so it fits typical 12V and 24V DC systems without adding much load. Output is a 360 degree white anchor light with a USCG 2 nautical mile rating.

The base retracts and locks so the light can be stowed when you are underway or trailering. The housing uses composite construction to keep weight down, and the assembly is sealed to an IP67 rating for rain, spray, and washdowns.

Key features

• 24 in overall height with 360 degree all-round white anchor output
• USCG rated 2 nautical miles for anchor light visibility
• 10-30 VDC input for 12V and 24V DC systems
• Low current draw: 80 mA at 12V, 45 mA at 24V (0.9W)
• IP67-rated sealing for wet weather and washdowns
• Base retracts and locks, so the pole can be stowed when not in use
• 2-wire hookup for a standard anchor-light switch circuit
• 2.5 in diameter profile
• CE certified and conforms to ABYC A16
• Operating temperature range: -31F to 131F (-35C to 55C)

Installation and setup

Mount the base on a flat surface where the light can extend and retract without hitting antennas, rails, outriggers, or canvas. On an arch or hardtop, place it where the lens has a clear 360 degree view and stays above gear that could block it at anchor.

Bed fasteners and the wire exit with marine sealant, then route the two conductors to a dry chase below deck. Use tinned marine wire and sealed connectors, and leave a small service loop so the base can be removed later without cutting the harness.

Electrical and system integration

This light is a straightforward 2-wire load on 10-30 VDC. Tie it into an existing anchor light switch or a dedicated breaker, and protect the circuit with a fuse or breaker sized for the run and the small current draw. Keep connections above the waterline and away from heat sources where possible.

Compliance and visibility

When used as an anchor light, the lens needs a clear 360 degree view. Avoid mounting next to vertical antennas, rocket launchers, or raised rails that can shadow the light in certain directions.

Use on board

It suits boats that anchor overnight and want an anchor light that stows down to reduce snags when lines and covers come out. The 24 in height is a practical middle ground when you need the light lifted above deck clutter without committing to a full-length pole.

Maintenance and care

Rinse salt residue off the base and lens during routine washdowns, and occasionally check that the lock mechanism moves freely. Inspect the wiring pass-through and connectors each season for chafe and corrosion, especially if the light lives on an exposed arch.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.