Lopolight Masthead/Anchor LED Navigation Light, For Vessels Under 12m, 2NM, White LED, FB Base, 10-32VDC, IP68, Horizontal Mount

Overview

The Lopolight Masthead/360-Degree Light is an all-round (360-degree) white navigation light rated for 2 nautical miles (2 NM). It runs on 10-32 VDC (12V or 24V systems) and draws 3 W (about 225 mA at 12 V and 156 mA at 24 V).

This version uses an FB (flat base) mounting system for horizontal installation. The housing measures Ø92.5 mm x 36 mm and is sealed to IP68, which suits exposed mast, arch, or pole locations that see spray and washdowns.

Key features

• 2 NM all-round (360-degree) white navigation light for masthead or anchor-light use where an all-round white is required
• 10-32 VDC input with a 3 W draw for straightforward use on 12V or 24V boats
• IP68 sealing for wet mounting locations and regular deck washdowns
• FB (flat base) POM mounting system with centered cable routing for clean pole or deck installations
• Pre-cabled with a 0.75 m shielded marine-grade lead; minimum feed wire gauge 0.5 mm2 (AWG 22)
• Horizontal mounting with a low-profile footprint (Ø92.5 mm x 36 mm) and a listed weight of about 0.46 kg
• Approved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR

Variants

This light is offered in multiple configurations that change the housing color.

Electrical ratings, IP68 sealing, dimensions, and approvals stay the same across the variants; the difference is the exterior finish.

• 201-020-FB-B: Housing color Black. A darker finish pairs naturally with black anodized spars, radar arches, and many antenna mounts.
• 201-020-FB: Housing color Silver. A silver finish matches bare aluminum masts, polished metalwork, and classic deck hardware.

Installation and setup

The unit mounts horizontally on the FB base, with wiring routed through the center of the base for a tidy run into a pole, hardtop, or deck. Plan the cable path before bedding the base so the lead stays protected and does not chafe on sharp edges.

Mounting can be done from the top using three clearance holes (3x Ø4.4 mm), or from underneath using three threaded holes (3x M4 x 0.7, 6 mm deep). This makes it easier to keep a clean top surface when you have access below the mounting panel.

Electrical and system integration

Connect to a fused 10-32 VDC lighting circuit and follow your vessel’s wiring practices for navigation lights. Use at least 0.5 mm2 (AWG 22) feed wiring and keep connections dry and strain-relieved in the mast base, arch, or overhead where the cable transitions into the boat.

The low power draw is helpful on boats that spend long nights at anchor or run with lights on for extended evening transits, without adding much load to the house bank.

Materials and corrosion resistance

The housing is anodized aluminum with a PMMA lens and A4 stainless steel fasteners. Combined with the IP68 seal, this construction suits exposed saltwater installations where the light sees spray, vibration, and routine cleaning.

What’s included

• Navigation light pre-cabled with a 0.75 m shielded marine-grade cable
• Installation guide

Use cases on board

This is a good match for small powerboats and sailboats that need an all-round white light on a mast, radar arch, or antenna pole, and want a low-profile base that keeps wiring centered and out of sight.

• 1296868_qbp275081.pdf
• 1296869_qbp275081.pdf
• 1310676_qbp275081.pdf
• 1310677_qbp275081.pdf

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.