B&G Nemesis Sailing Display, Touchscreen, NMEA 2000, IP67

Overview

The B&G Nemesis Sailing Display is a full-touch sailing data display offered in 9 inch and 12 inch sizes. It runs on 12/24 V DC power (10-31.2 V input range) and carries an IPX6/IPX7 waterproof rating for exposed helm or mast installations.

Both sizes use an IPS SolarMax HD screen with wide viewing angles and brightness that stays readable in strong sun. The 9 inch version is rated at 1300 nits with a 1280 x 720 resolution, and the 12 inch version is rated at 1500 nits with a 1280 x 800 resolution.

Pages can be built from pre-set dashboards or created from scratch with a drag and drop editor. Context modes can change what is shown based on point of sail, so the numbers you care about stay in front of you as conditions change.

Key features

• Multi-touch IPS SolarMax HD display with wide viewing angles and support for viewing with polarized sunglasses
• Two screen sizes: 9 inch (1280 x 720, 1300 nits) and 12 inch (1280 x 800, 1500 nits)
• 12/24 V DC supply (10-31.2 V min-max) with max power draw of 13 W (9 inch) or 19 W (12 inch)
• NMEA 2000 Micro-C connection (1 LEN) for instrument and sensor data on the backbone
• 8-pin power/Ethernet connection for tying into a B&G CPU Ethernet network
• Built-in Wi-Fi (802.11b/g/n)
• IPX6/IPX7 waterproof rating for spray and cockpit washdowns
• Portrait or landscape mounting, with panel-mount and rear-mount options
• Supports multi-display setups when connected through a Nemesis Hub
• Compass safe distance: 0.5 m (1.6 ft)

Variants

This product is offered in multiple screen-size configurations.

The main differences are screen size, brightness, resolution, and power draw. Across the range, connectivity follows the same pattern with NMEA 2000 (Micro-C) plus a combined power/Ethernet connection, and both sizes support portrait or landscape mounting.

• 000-15611-001: Size 9 inch. A practical fit for mast mounting or tighter helm pods where space is limited but readability still matters.
• 000-16518-001: Size 7 inch. A smaller fit for mast mounting or tighter helm pods where space is limited.
• 000-15612-001: Size 12 inch. A better match when the display needs to be read from farther back in the cockpit or when you want more data visible at once.

Installation and setup

The display can be installed in a cutout for panel mounting or fastened from behind for rear mounting, and the same housing supports portrait or landscape orientation. Plan routing for the combined power/Ethernet cable and a NMEA 2000 drop to the backbone, and keep the unit at least 0.5 m (1.6 ft) from a magnetic compass. Protect the supply with a fuse or breaker sized to the display: 1.5 A for the 9 inch unit or 2 A for the 12 inch unit on 12/24 V systems.

Electrical and system integration

Nemesis can take sailing and instrument data over NMEA 2000 through the Micro-C connector, and it can also exchange data over Ethernet via the 8-pin power/Ethernet port. For multi-screen layouts in one area, a Nemesis Hub can distribute power and Ethernet between displays. On more complex boats, it helps to map out which sensors and processors live on NMEA 2000 versus Ethernet so the data you want shows up at the station where this display is installed.

Use on board

This display is a good match for sailors who want a dedicated, easy-to-read screen for performance and instrument data at the mast, helm, or a trim station. It fits race boats that switch between upwind and downwind pages during maneuvers, and it also works well on cruising sailboats where having clear cockpit instrumentation reduces trips below.

Maintenance and care

Even with an IPX6/IPX7 rating, it is worth rinsing salt off the face and connectors and making sure cable strain relief stays secure after service. Use mild cleaners on the touchscreen, and check mounting fasteners and cable support after the first few outings and during seasonal maintenance.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.