Jabsco Impeller Kit, 6-Blade, Single Flat Drive, 2 in Diameter

Overview

The Jabsco 6303 Impeller Kit is a replacement flexible impeller kit for compatible Jabsco marine pumps where a 6-blade, single-flat-drive impeller is required.

This impeller size is commonly listed as 2 in. diameter by 7/8 in. wide with a 5/16 in. shaft diameter, also identified as Jabsco profile H. Those measurements matter because a flexible impeller must match the pump body, shaft, and drive style closely to maintain proper water movement and avoid premature wear.

The range is offered in neoprene and nitrile materials, giving boat owners a way to match the impeller material to the fluid being moved. Neoprene is the standard choice for water-pumping duties, while nitrile is used where oil, fuel contamination, or waste-handling conditions may be present.

Key features

• 6-blade flexible impeller format for compatible marine pump service and seasonal replacement work.
• 2 in. diameter, 7/8 in. width, and 5/16 in. shaft diameter help confirm fit before installation.
• Single flat drive matches pumps that use this shaft engagement style.
• Profile H sizing gives a useful cross-check when comparing the existing impeller to Jabsco identification charts.
• Material options cover common onboard pumping needs, from clean water movement to more contaminated fluid transfer.
• Suitable for maintenance planning on boats where carrying a spare impeller reduces downtime during cruising, fishing, or dockside service.

Variants

This Jabsco 6303 impeller kit is offered in two material configurations.

The impeller dimensions, 6-blade layout, single flat drive, and profile H identification are consistent across the two variants. The key difference is the impeller material, which affects the type of onboard pumping job the kit is suited for.

• 6303-0001-P: Neoprene material. This version is used for water-pumping applications such as compatible shower drain, ballast, transfer, and general marine water pumps.
• 6303-0003-P: Nitrile material. This version is used where the pumped fluid may include oil contamination, fuel contamination, or marine toilet waste material.

Compatibility and fit

Before installation, compare the removed impeller with the replacement by checking blade count, outside diameter, width, shaft diameter, and drive shape. A close match is important because even a small mismatch can reduce pump output or place extra load on the pump.

This kit is a practical service part for boat owners maintaining compatible Jabsco flexible impeller pumps used around the vessel, including water transfer, shower drain, ballast, bilge-related, and waste-handling systems where the pump model calls for this profile and material.

Installation and care

Inspect the pump chamber, cover plate, gasket surfaces, and shaft area when replacing the impeller. Any scoring, debris, hardened rubber pieces, or a damaged seal surface should be addressed before the pump is put back into service.

Flexible impellers should not be run dry. After replacement, confirm that the pump is primed and moving fluid normally, then check for leaks around the cover and fittings. Keeping a spare impeller kit on board is sensible for boats that see regular use in saltwater, long weekends away from the dock, or cruising where pump service parts may not be easy to find.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.