Hella Marine ValueFit Cube 4-LED Cube Light Kit, 2 Lights, 10-30V DC, Die-Cast Aluminum Housing, Wiring Harness with DT Connectors

Overview

The Hella Marine ValueFit Cube is a two-light LED kit used as a deck, spreader, or docking light on boats with 12V or 24V DC systems. It runs on 10-30V DC and uses four LEDs per lamp, drawing 12W each, with measured output of 690 lm (spot) or 600 lm (flood) depending on the version.

Each lamp uses a die-cast aluminum housing with a polycarbonate lens and an IP67 rating for rain and washdowns. The included harness, relay, fuse, and switch make it straightforward to wire as a dedicated auxiliary circuit at the helm, instead of tapping into an existing light feed.

This is a solid fit for skippers who want more usable light on the foredeck, cockpit, or around the dock without jumping to a full-size light bar.

Key features

• Two compact cube lamps with upright mounting brackets, easy to aim on a hardtop, radar arch, spreaders, or cockpit coamings
• 10-30V DC input for typical 12V and 24V boat electrical systems
• 4-LED optics with measured output tied to beam pattern: 690 lm (spot) or 600 lm (flood)
• IP67-rated lamp body with die-cast aluminum housing and polycarbonate lens for wet, exposed mounting locations
• Kit-style wiring with DT connectors, plus relay, fuse, and switch for a clean install and easier servicing later

Variants

This kit is offered in two configurations, listed here as Range options.

The difference between variants is the beam pattern. Spot concentrates light into a tighter cone for more reach, while flood spreads light wider for closer work areas.

• 357204821 Range: Close Range. Spot beam pattern with 690 lm measured output when you want a tighter throw down a dock line or ahead of the bow.
• 357204831 Range: Long Range. Flood beam pattern with 600 lm measured output when you want wider coverage across the foredeck, cockpit, or swim platform area.

What’s included

• Two LED lights with mounting brackets
• Wiring harness with DT connectors
• Relay
• Fuse
• Switch
• Mounting hardware
• Mounting instructions

Installation and setup

Plan the mounting location so the lamps can be aimed without the bracket hitting a handrail, spreader base, or canvas frame. The housings are compact at about 3.1 in wide by 3.4 in high by 3.2 in deep, which helps on tight arches and spreaders.

Route the harness away from sharp edges and moving rigging, and seal any deck penetrations properly. The relay and fuse are intended to be installed as part of the circuit, with the switch mounted where it is easy to reach from the helm.

Compatibility and on-board use

This is an auxiliary work-light style kit for DC systems (10-30V). It is commonly used to light up the bow for docking, to add spreader light on a sailboat, or to brighten a cockpit work area when handling lines at night.

When mounting high on a hardtop or spreaders, aim the lamps to avoid glare back into the cockpit and to keep light out of the helmsman’s direct line of sight.

Maintenance and care

For saltwater boats, a quick freshwater rinse after washdowns helps keep the lens clear and reduces buildup around the bracket hardware. Periodically re-check fasteners and cable support points, especially after rough runs or trailering.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.