i2Systems Apeiron A1120 Tri-Light LED Downlight, Round Bezel, Spring Mount, 9-30VDC, 1.5W, IP67, 120 Degree Beam
Got questions? Ask an expert!
Know someone who needs this?
Share it with your crew or mechanic.
Overview
The i2Systems Aperion Tri Light is a spring-mount downlight that runs on 9-30 V DC and draws 1.5 W, making it a fit for both 12 V and 24 V onboard systems.
It combines red, blue, and white output in one fixture. White is offered in cool white or warm white depending on the variant, so you can keep night vision with red, run low-glare blue, or switch to white for general lighting.
With an IP67 rating and a stainless steel housing, it suits damp areas and regular washdowns. It fits a 2.39 in (61 mm) cutout with a 3.15 in (80 mm) bezel and about 1.24 in (32 mm) overall height.
Key features
- 9-30 V DC input for 12 V and 24 V systems
- 1.5 W draw per fixture for low load on battery banks
- Tri output: red, blue, and white (cool white or warm white by variant)
- Spring-mount installation for quick retrofits in liners and panels
- IP67-rated for dust and water exposure, including temporary immersion up to 1 m
- 2.39 in (61 mm) cutout, 3.15 in (80 mm) bezel, 1.24 in (32 mm) height
- Bezel finish options shown here: Chrome or White (varies by variant)
Variants
This light is offered in multiple configurations based on white color temperature and bezel finish.
Across the range, the LED color set remains red, blue, and white, while the white output changes between cool white and warm white and the visible bezel changes between Chrome and White.
- A1120Z-11HAE: LED color Red / Cool White / Blue; Finish Chrome. Cool white reads cleaner for task lighting and brighter-looking ambient light.
- A1120Z-11HCE: LED color Red / Warm White / Blue; Finish Chrome. Warm white keeps living spaces looking softer at night.
- A1120Z-31HAE: LED color Red / Cool White / Blue; Finish White. A white bezel blends into light liners and painted overheads.
- A1120Z-31HCE: LED color Red / Warm White / Blue; Finish White. A white bezel with warm white suits cabins where you prefer a warmer tone.
Installation and fit
Plan for a 2.39 in (61 mm) cutout and allow about 1.24 in (32 mm) clearance behind the mounting surface. The spring clips hold the fixture in place, which works well for overheads and bulkhead panels where you want a clean face without visible fasteners.
On cored panels, seal the exposed core around the cutout and keep wiring clear of sharp edges to prevent chafe over time.
Electrical and control
Connect it to a DC lighting circuit within the 9-30 V range. On 24 V boats, the wide input range helps avoid issues when system voltage rises during charging.
Dimming and control can be handled through LightLink dimmers such as LL-101 (momentary switch dimmer) and LL-105-R (0-10 V bridge and dimmer). LL-101 is listed to dim up to 20 compatible fixtures, and LL-105-R is listed to dim up to 50.
Use on board
Red and blue modes are commonly used to reduce glare and help preserve night vision on night runs, while white mode is used for everyday cabin and cockpit lighting. This mix works well in cabins, companionways, berths, and cockpits where you switch between underway and dockside lighting.
Boats that run long hours on house batteries and want multiple small fixtures rather than a few high-draw lights tend to benefit from the 1.5 W load per light.
Maintenance and care
Rinse salt spray off the bezel after washdowns and avoid abrasive cleaners on plated or painted finishes. In wet mounting locations, check the surrounding seal and wiring connections during seasonal inspections.
Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.
Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.
Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.
Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.
Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.
Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.
To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.
We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.
