Lopolight 225 Degree Double Masthead Light, For Vessels Over 50m, White Light, 6NM, IP68, 22-32VDC, 13W, Horizontal Mount

Overview

The Lopolight 300-138 is a double masthead navigation light that shows a 225 degree white sector with a 6 nautical mile rating for vessels over 50 m (164 ft). It uses two separate light modules (primary and secondary) so either circuit can be run independently for redundancy.

It runs on 22 to 32 V DC (24 V systems) and draws 13 W, with an IP68 sealing level for exposed mast or superstructure mounting. The housing is aluminum with a silver anodized finish and a PMMA lens, and the electronics are potted to handle vibration and washdowns.

Overall size is about 92.5 mm (3.64 in) diameter and 128 mm (5.03 in) height, with a listed weight of 1 kg. It mounts horizontally on the included base, with cable entry available from the side or bottom via M20x1.5 gland ports.

Key features

• 225 degree white masthead sector with a 6 nautical mile visibility rating
• Two independent light circuits (primary and secondary) for built-in redundancy
• 22 to 32 V DC operating range for 24 V onboard systems
• 13 W power consumption and intensity rated above 94 cd
• IP68 sealing with internal potting for water exposure and vibration
• Operating temperature range from -25°C to +55°C
• Aluminum housing with a silver anodized finish and a PMMA lens
• Side or bottom cable routing using M20x1.5 cable-gland openings and a 5-pin connector
• Complies with COLREG72, EN14744, IEC 60945, and USCG UL1104 requirements, with LR certification

What’s included

• Double navigation light on 400-034 aluminum base
• HDPE base plate
• 3 M6x14 screws
• 2 M20x1.5 cable glands (for 7 to 13 mm cable diameter)
• 2 M20x1.5 blinding caps
• 5-pin connector plug
• Installation instructions

Compatibility and fit

This light is intended for installations where a 6 nautical mile masthead light is required on vessels over 50 m (164 ft). It is suited to 24 V DC electrical systems and will not be a match for 12 V-only boats.

Plan the mounting location so the 225 degree sector has a clear view forward and to the sides, without being blocked by antennas, domes, or crane structures. Confirm you have room for the 92.5 mm diameter body and the included base footprint, and that your cable routing can reach the gland position you want to use.

Installation and wiring

The unit mounts horizontally on the supplied base and accepts cable entry from either the side or bottom using the included M20x1.5 glands and caps. After positioning, keep the lens and sealing surfaces clean before final tightening so the IP68 sealing is not compromised.

Primary and secondary circuits are separated at the 5-pin connector. Pin 1 is primary positive and pin 2 is primary negative, pin 4 is secondary positive and pin 5 is secondary negative, and pin 3 is not used. This makes it straightforward to run independent feeds from a nav-light panel or a monitoring system while keeping the two light modules electrically separate.

Use on board

This is a practical choice for commercial vessels, large motor yachts, and workboats that need a 6 nautical mile masthead light and want the added security of a second, independent light module in the same housing. It also fits well on boats doing long night transits where redundancy matters and access to the masthead is not convenient underway.

Maintenance and care

Rinse salt off the housing and lens during routine washdowns and check that the cable glands remain snug. If the lens becomes hazy or scratched, clean with a plastic-safe cleaner to avoid damaging the PMMA surface.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.