Lumishore 50in Curved LED Light Bar, White Light 5000K, 10.5-31V DC, IP68, 39,600 lm

Overview

The Lumishore 010-04466-00 is a 50 inch (130 cm) curved LED light bar that puts out 39,600 fixture lumens of white light (5500 K) for lighting up decks and working areas on board.

It runs on DC systems from 10.5 to 31 V, so it fits typical 12V and 24V boats. Plan your wiring and switching around the load: up to 32 A on a 12V system (16 A on 24V). The housing is rated IP68 for water ingress and uses a powder-coated aluminum body with a Makrolon lens, which suits exposed mounting where spray and washdowns are normal.

The beam pattern is a letterbox spread (about 9 degrees vertical by 50 degrees horizontal), which helps throw light forward without turning the whole deck into glare when it is mounted up high on a hardtop or arch.

Key features

• 50 inch (130 cm) curved light bar with white housing
• White output at 5500 K with 39,600 fixture lumens
• Supply voltage range: 10.5 to 31 V DC for 12V and 24V systems
• Max current draw: 32 A at 12V, 16 A at 24V
• IP68 water ingress protection for exposed mounting and washdowns
• Letterbox beam spread around 9 degrees vertical by 50 degrees horizontal
• Powder-coated aluminum body with a Makrolon lens
• Simple 2-wire connection; 3 wires when used with an EOS-LUX Command Center

What’s included

• Curved 50 inch light bar
• Stainless steel bracket and fasteners

Installation and setup

Mount it where the bar can throw light forward without reflecting off rails or the top edge of your windshield. On most boats, that means a hardtop leading edge, a radar arch, or a sturdy cabin-top face. Use marine sealant on any deck penetrations, and keep dissimilar metals isolated where needed so the mounting stays clean in saltwater.

The bracket makes it easy to aim. After the first few runs, re-check fastener tightness, especially if the boat sees pounding or frequent trailering.

Electrical and system integration

This light bar draws real current, so treat it like a high-load accessory: short wire runs where possible, solid terminations, and overcurrent protection sized for the circuit and your switch or controller. It can be controlled with a basic on/off switch, or integrated with ECLIPSE and EOS-LUX command centers; wiring changes to a 3-wire setup when using EOS-LUX.

Use cases on board

This is a practical fit for boats that need one forward-facing spreader to light up a wide working area, such as docking at night, setting lines, handling fenders, or moving around the bow when the deck is wet. The wide horizontal spread helps when you are working with crew on deck, while the tighter vertical angle keeps the light focused where you need it.

Maintenance and care

Rinse the housing and lens with fresh water after salt runs, especially around the bracket and fasteners. Keep the lens clean to maintain output, and periodically inspect wiring at the light and at the switch or controller for heat, corrosion, or loose connections.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.