Lumishore ECLIPSE CL30 LED Courtesy Light, For ECLIPSE Command Center, RGB, 10-15V, IP68

Overview

The Lumishore 010-04542-00 is an ECLIPSE CL30 RGB courtesy light for 12V DC boats (10 to 15V). It is a small, flush-style light with a 33 mm front bezel and a 23 mm cutout, built for step lighting, toe-kicks, and other low-level accents where you want color-select lighting without a bulky fixture.

This is the RGB version, so color and dimming control are handled through the ECLIPSE Command Center. Power is still a simple 2-wire connection, and current draw is up to 0.1A at 12V, which makes it easy to plan into existing lighting circuits.

The housing is fully sealed with an IP68 rating, so it works well in wet areas and under washdowns, but it is not intended for permanent submersion.

Key features

• 12V DC only operation (10 to 15V DC input range)
• RGB color-select courtesy light with dimming and color control through the ECLIPSE Command Center
• Fully sealed IP68 construction for wet locations and washdowns
• Flush-mount fit with 33 mm bezel and 23 mm hole cutout
• Simple 2-wire hookup (power and ground)
• Up to 0.1A max current draw at 12V for low electrical load planning
• Not intended for permanent submersion, suitable for interior and exterior mounted areas

Installation and fit

Plan for a flat mounting surface and a 23 mm cutout. A snug cutout matters here, so it is common to start slightly undersized and bring the hole up to final size for a tight fit. Use clear marine sealant at the lens-to-surface interface and at the rear hardware to keep water from tracking into the mounting surface.

Before drilling, confirm you have room behind the panel for wiring and access to secure the rear side. If you are installing multiple lights in a run, size wiring so voltage drop stays low all the way to the last light.

Electrical and control

This RGB version requires an ECLIPSE Command Center for control. It is not meant to be connected to third-party lighting control products or dimmers. Protect the circuit with an appropriately sized fuse, isolate vessel power before wiring, and keep connections dry and supported so they do not work loose in vibration.

Use on board

This light fits well in stair treads, cockpit steps, companionway areas, under-gunwale pockets, helm footwells, and inside lockers where you want a soft reference light at night. It is a good match for boats already running an ECLIPSE lighting setup, or builds where centralized RGB control is part of the plan from the start.

Maintenance and care

Rinse salt spray off when you can and wipe the lens with a soft cloth. For cleaning, stick to mild soap and water and avoid chemical cleaners that can haze the lens or damage sealant lines over time.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.