Lumishore LUX Speaker Light Driver, For RGB/CRGBW LED Marine Speakers, 10.5-31V, IP68, Up to 16 Speakers, ISO 8846

Overview

The Lumishore 010-04448-00 is a LUX speaker light driver that links compatible RGB and CRGBW LED marine speakers into the Lumishore LUX lighting system so speaker lighting can follow scenes and music-reactive modes. It runs on 10.5-31 V DC for 12V/24V boats and draws up to 5.6A at 12V or 2.8A at 24V. One driver controls up to 16 speakers, with up to 5 m (16.8 ft) from the driver to the first speaker.

Audio connects through an EOS-LUX Command Center mini-jack so the driver can analyze the music signal in three frequency bands and trigger different colors per band. Control can be handled by a momentary switch, or expanded into a Lumi-Link setup with an optional display and compatible MFD integration. The enclosure is IP68-rated and built from powder-coated aluminum in a compact 113 x 79 x 27 mm body (not including cable glands or cables).

Key features

• 10.5-31 V DC input range for 12V/24V systems; up to 5.6A at 12V or 2.8A at 24V maximum draw
• Controls up to 16 LED marine speakers from a single driver
• For use with CRGBW (cold white, red, green, blue, warm white) and RGB (red, green, blue) LED marine speakers
• Music-reactive lighting via EOS-LUX Command Center audio input with 3-band frequency analysis
• IP68-rated enclosure with powder-coated aluminum case; 113 x 79 x 27 mm housing size (not including cable glands or cables)
• Built-in electrical protection features including surge protection, reverse polarity protection, soft start, inrush protection, low-voltage protection, and automatic thermal roll-back
• Ignition protected to ISO 8846
• Maximum cable length to the first speaker: 5 m (16.8 ft)

Compatibility and system integration

This unit is a lighting driver for the LEDs built into CRGBW or RGB marine speakers. It does not amplify audio, so your head unit and amplifiers still handle sound output and tuning.

When installed as part of a LUX system, speaker lighting can be coordinated with other LUX and EOS lights for consistent color scenes across the cockpit, transom, and cabin areas.

Installation and setup

Mount the driver where you can reach the wiring and keep it above areas that can hold standing water. Plan the power feed from the DC distribution so conductor sizing and circuit protection account for the maximum current draw on your system voltage.

Keep the first speaker within 5 m (16.8 ft) of the driver, then route harnesses to the remaining speakers as your layout allows. Tighten cable glands and use drip loops so water does not track along wiring into the enclosure.

Use on board

This setup suits boats that want speaker lighting to match cockpit and accent lighting during dockside evenings, raft-ups, and night cruising, while still keeping control simple at the switch. It also makes sense when you want one control point to manage multiple speaker locations, up to 16 speakers on a single driver.

Maintenance and care

Re-check wiring strain relief and cable gland tightness after the first few outings and any time you service the audio system. If lighting output changes under heavy use, inspect airflow around the driver, supply voltage at the unit, and connection quality before chasing settings.

What's included

• One (1) LUX Speaker Light Driver

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.