Lumishore LUX SNL180 Neon Flex Strip Light, CRGBW, IP67, 3000mm

Overview

The Lumishore 010-04437-00 is a LUX SNL180 neon flex strip light in a 3000 mm length that gives you full color CRGBW plus tunable white from 2700K to 6500K. The diffused construction keeps the light line smooth so you do not see individual LED dots on glossy gelcoat, glass, or polished trim.

This strip runs 180 LEDs per meter and carries an IP67 ingress rating for wet areas and routine washdowns, while staying intended for above water mounting. Dimming and color control are handled through a LUX Strip Light Driver, with control options that range from a simple momentary switch to integration with a compatible MFD or an optional Lumishore display.

Key features

• 3000 mm (3 m) neon flex strip with a diffused light line for clean accent lighting
• Full spectrum CRGBW plus tunable white from 2700K to 6500K in the same strip
• 180 LEDs per meter for an even output along the run
• IP67 ingress rating for interior and exterior locations above the waterline
• Dimmable control through a LUX Strip Light Driver
• Flexible bend profile for curved runs around coamings, coves, and framing
• Screw clip mounting for secure installs in high vibration areas
• UV resistant and salt spray tested for long-term exposure on deck and in cockpits
• Driver supports multiple strips with up to 10 m total length per driver for multi-zone layouts

Installation and setup

Plan the run first and confirm you have room for the strip’s bend radius on corners and transitions. For a clean finish, mount the strip where it is shielded from direct impacts and abrasion, then use the supplied screw clips to keep the light line straight through turns and overhead sections.

Route wiring so it stays protected from chafe and standing water, and keep the strip installed above the waterline. When installing in open cockpits, under gunwales, or on T-top structures, leave slack where panels open and add strain relief at the driver end to prevent fatigue from vibration.

Compatibility and control

This strip is powered through a LUX Strip Light Driver, which also handles dimming and color mixing. Control can stay simple with a momentary switch, or expand into helm control using compatible MFD integration and optional display hardware, which is useful when you want consistent lighting scenes across cockpit, cabin, and steps.

If you are planning multiple accent zones, the driver capacity of up to 10 m total strip length is a practical limit to keep in mind. Measuring runs before you start helps you decide whether you can keep everything on one driver or split zones across multiple drivers.

Use cases on board

This style of neon flex works well anywhere you want a continuous light line rather than point sources, such as under gunwales, toe-kick areas, cabin coves, headliners, and hardtop accents. It is a good match for boats that spend time in salt air and regular washdowns, and for owners who want both color and adjustable white for different on-board moods without changing fixtures.

What’s included

• One (1) Superbright Neon Flex SNL180 strip light, 3000 mm

Maintenance and care

Rinse off salt residue during routine washdowns and wipe the lens surface with mild soap and water as needed. Periodically check clip fasteners and cable routing in high traffic areas to make sure the strip stays supported and protected from chafe.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.