Lumishore LUX SNL180 Neon Flex Strip Light, 1000mm, CRGBW, IP67
Got questions? Ask an expert!
Know someone who needs this?
Share it with your crew or mechanic.
Overview
The Lumishore 010-04417-00 is a 1000 mm neon flex LED strip light that gives you a continuous line of light for accents and indirect lighting around the boat. It uses 180 LEDs per meter behind a spot-free diffuser, and it supports full spectrum color plus tunable white from 2700K to 6500K.
The strip is fully sealed to an IP67 rating for above-water installations, so it can be mounted in wet areas and see normal washdowns, but it is not meant for permanent submersion. Plan the run around a minimum 120 mm bend radius, keep bends in the side-to-side direction only, and avoid areas with strong direct sunlight.
Power and control are handled through a compatible LUX Strip Light Driver module. The driver can be operated with momentary switches, or tied into an EOS-LUX Command Center for control from a compatible MFD, depending on the rest of your lighting system.
Key features
- 1000 mm factory-sealed neon flex length; do not cut.
- Full spectrum color plus tunable white in the same strip (2700K to 6500K).
- 180 LEDs per meter with a spot-free diffuser, so you do not see individual LED points.
- IP67 sealed for indoor or outdoor mounting above the waterline; suitable for wet areas but not permanent submersion.
- 5 W per meter power rating for straightforward load planning.
- Works with LUX Strip Light Driver modules; regulated drivers accept 10.5 to 31 V DC input for 12 V and 24 V systems.
- Side-bend only with a 120 mm minimum bend radius; avoid twisting or bending in the vertical axis.
- 14.5 mm x 21 mm cross section with stainless steel screw clips; UV resistant and salt spray tested.
Installation and setup
Mounting is done with stainless steel clips fastened with suitable screws for your surface. Once the clips are aligned, the strip presses into place with a positive click, and adding extra clips around tighter bends helps the strip stay seated.
This neon flex is supplied in premade lengths that are sealed to maintain the IP67 rating, so choose the length you need up front and route it as a complete piece. When handling it, uncoil along the length and avoid pulling, stretching, or dropping the strip during the install.
Electrical and control integration
Connect the strip only to a compatible LUX Strip Light Driver module, then feed the driver from your vessel supply. Switch control can cover on/off, dimming, and preset colors, and an EOS-LUX Command Center can be added when you want multi-zone control and MFD integration using the correct interface accessories for your electronics.
Use cases on board
This style of neon flex fits spots where a clean glow matters, like under-gunwale lighting, cockpit coamings, cabin headliners, helm eyebrow lighting, or step and toe-kick accents. It suits owners who want dockside color scenes and practical white light underway without swapping fixtures.
What's included
- One (1) neon flex strip light, 1000 mm length.
- Stainless steel mounting clips.
Maintenance and care
Rinse with fresh water after heavy salt exposure and wipe with a soft cloth. Periodically check that clips stay tight and the cable route is protected from chafe where it passes through bulkheads or under trim.
Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.
Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.
Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.
Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.
Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.
Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.
To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.
We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.