Apollo Lighting - Luna Courtesy Light - 10-30V DC

Luna Oval Marine Courtesy Light – Sleek Illumination Designed for Life on the Water

Bring refined, low-profile lighting to any marine interior or exterior with the Luna Oval Courtesy Light. Designed specifically for boats and marine applications, Luna combines a contemporary oval profile with premium stainless steel and soft, controlled illumination. Its compact design makes it ideal for steps, companionways, cockpits, walkways, cabins, side panels, and other areas where functional lighting should complement the vessel rather than overpower it.

Multiple Color Options for the Right Ambience

Luna is available in several lighting configurations to suit both functional and decorative applications. Single-color options include Warm White 3000K, Daylight 4000K, and Cool White 5000K. Tri-color versions are available in 3000K / Red / Blue and 5000K / Red / Blue, allowing one fixture to provide comfortable white illumination as well as red or blue accent lighting. The technical specification also lists a dedicated Blue configuration.

Downlight or Up-and-Down Illumination

Choose between a downlight configuration for focused illumination beneath the fixture or an up-and-down configuration for a more architectural lighting effect. The downlight version works especially well for stairs, deck transitions, and walkways, while the up-and-down design creates a sophisticated ambient glow on bulkheads, cabin walls, and entertainment areas.

Brushed or Polished Stainless Steel Finishes

The stainless steel bezel is available in both Brushed Stainless Steel and Polished Stainless Steel, making it easy to coordinate the fixture with the vessel's existing hardware and interior finishes. Brushed stainless delivers a clean, contemporary appearance with softer reflections, while polished stainless provides a bright, mirror-like finish suited to high-end yacht interiors and exterior detailing.

Fully Sealed for Marine Environments

Designed for both indoor and outdoor installations, the Luna Courtesy Light features an IP67-rated sealed construction, helping protect the fixture in demanding marine environments where moisture and water exposure are common. The installation guide specifies mounting the fixture on a flat, level surface rather than a curved surface.

Smooth Dimming and Simple Control

Luna supports PWM dimming, allowing the light level to be adjusted for anything from practical pathway illumination to subtle nighttime ambience. It can operate with a basic On/Off switch or be dimmed using the Apollo Universal Dimming Module. Tri-color models allow you to cycle through the available colors by quickly switching the light off and back on, and all three colors can be dimmed with the Apollo Universal Dimmer.

Compact Profile with Powerful Accent Lighting

Despite its discreet dimensions, Luna provides effective illumination without introducing a bulky fixture into the space. The overall fixture measures approximately 91 mm x 64.13 mm x 9.4 mm (3.58 in x 2.53 in x 0.37 in), allowing it to sit close to the mounting surface while maintaining a premium, finished appearance. The dimensional drawing also shows a mounting body of approximately 90.4 mm x 53.4 mm (3.56 in x 2.10 in) with mounting points spaced approximately 79 mm (3.11 in) apart.

Electrical Specifications

The Luna Courtesy Light operates on 10-30V DC only, making it suitable for common 12V and 24V marine electrical systems. Rated power consumption is approximately 1.36 watts at 12V and 1.75 watts at 24V, with approximately 0.113A at 12V and 0.073A at 24V. The fixture is polarity sensitive and supports PWM dimming.

Light Output Specifications

The 3000K, 4000K, and 5000K white configurations produce approximately 25 lumens at either 12V or 24V. The Blue output is rated at approximately 5 lumens, while Red is rated at approximately 8 lumens. The fixture has a CRI rating of 80, providing clean and consistent illumination for marine accent and courtesy-lighting applications.

Installation Specifications

The installation guide specifies a nominal 17 mm cutout, and the dimensional drawing shows an approximately 15.85 mm (0.62 in) rear cable-entry area. The fixture should be installed on a flat, level mounting surface, and the vessel's electrical power should be disconnected or isolated before installation. The manufacturer recommends professional electrical and mechanical installation.

Highlights

• Premium oval marine courtesy light for interior and exterior boat applications

• Single-color options: 3000K Warm White, 4000K Daylight, and 5000K Cool White

• Tri-color options: 3000K / Red / Blue or 5000K / Red / Blue

• Available with Brushed Stainless Steel or Polished Stainless Steel bezel

• Choose Downlight or Up-and-Down illumination

• 10-30V DC operating range for 12V and 24V systems

• PWM dimmable

• IP67 fully sealed construction

• White light output up to 25 lumens

• CRI 80

• Low power consumption: 1.36W at 12V / 1.75W at 24V

• Overall dimensions: 91 x 64.13 x 9.4 mm (3.58 x 2.53 x 0.37 in)

• Mounting body: approximately 90.4 x 53.4 mm (3.56 x 2.10 in)

• Mounting-hole spacing: approximately 79 mm (3.11 in)

• Nominal cutout: 17 mm

• Ideal for steps, companionways, cockpits, cabins, walkways, bulkheads, and yacht interiors

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.