Lumishore SUPRA THX804 Thru-Hull Underwater LED Light, Dual Color Blue/White Light, 10.5-31V, IP68, 13,500 Fixture Lumens, 110° Beam, External Driver

Overview

The Lumishore 010-04518-00 is a SUPRA THX804 thru-hull underwater LED light with an external driver for 10.5 to 31 V DC (12V or 24V) systems. It runs in blue or white, with 13,500 fixture lumens in white and a 110° beam that spreads the light wide under the hull.

The light face measures 110 mm (4.33 in) and sits low outside the hull with an 18 mm (0.70 in) profile. The thru-hull shaft is 140 mm (5.51 in) long and uses a 27 mm (1-1/16 in) shaft cut-out. The housing is marine bronze with a borosilicate glass lens, and the assembly carries an IP68 water-ingress rating for continuous submersion.

Max current draw is 8.8 A at 12V or 4.4 A at 24V, which helps when sizing wiring and circuit protection. This setup is a practical fit for boats where you can access the inside of the transom or hull for the driver, notes on bonding, and clean cable routing.

Key features

• Blue and white output modes, with fade and strobe functions available through the SUPRA i-Connect Hub and Switch
• 13,500 fixture lumens (white) with a 110° beam angle for broad underwater coverage
• Runs on 10.5 to 31 V DC for both 12V and 24V systems; max current draw 8.8 A / 4.4 A (12V/24V)
• IP68-rated for submersion, with a marine bronze body and borosilicate glass lens
• Low outside profile: 110 mm (4.33 in) face with an 18 mm (0.70 in) housing height
• 27 mm (1-1/16 in) shaft cut-out and 140 mm (5.51 in) shaft length for thru-hull installation planning
• 3 m (9.8 ft) light cable and plug-and-play connections to the multi-channel external driver
• Built-in protection features including 3,000V surge protection, reverse polarity protection, soft-start electronics, and power line noise suppression

What’s included

• SUPRA THX804 thru-hull underwater LED light
• External driver

Installation and fit

This is a thru-hull mount, so plan for drilling the 27 mm (1-1/16 in) shaft hole, bedding and sealing the light properly, and having clear access inside the hull for the backing hardware and the external driver. The outside face is kept low to the hull, which helps when mounting on the transom or along the sides where you want a clean profile.

A bonding connection is provided on the light and bonding is required. For metal hull installations, hull isolation sleeves are available.

Electrical and control integration

Mount the external driver in a location that stays dry and allows service access, then route the light’s 3 m (9.8 ft) cable back to it. Control is supported through the SUPRA i-Connect Hub and Switch, and MFD screen control or WiFi control is supported when paired with the required SUPRA Bridge Module and a compatible setup.

Maintenance and care

Keep the lens clear of growth to maintain light output, and wash it with mild soap and water during routine hull cleaning. Avoid abrasive pads on the glass lens, and re-check sealing and cable routing any time the boat is hauled or after hard impacts.

Shipping
We ship worldwide from the United States. Rates are calculated at checkout based on destination and package weight. Some items include free shipping, which will show automatically. Not every product is eligible for international shipping; checkout will confirm eligibility. We do not ship to PO Boxes except through USPS, and not all packages qualify.

Processing and dispatch
Most orders are verified, packed, and handed to the carrier within 1 to 2 business days. Some products may need extra handling time or ship directly from the manufacturer. For certain international orders, inventory transfers between warehouses may add time. If any delay is expected, we will let you know the dispatch date.

Delivery and tracking
Deliveries are handled by trusted carriers such as USPS, UPS, FedEx, and DHL. Estimated arrival times appear at checkout and depend on your location and the service you choose. These are estimates and can be affected by customs or carrier disruptions. A shipping confirmation with a tracking link is emailed when your order ships, and tracking may take up to 24 hours to update. You can also view tracking in your account.

Duties, taxes, and support
International customers are responsible for any customs duties, taxes, and fees charged by the destination country. If these charges are refused and a shipment returns to us, the carrier’s return cost and any re-entry customs fees will be deducted from the refund. If your order is late or you need help, contact cs@qualityboatparts.com and we will assist you.

Quality Boat Parts is a reseller. Many items include a manufacturer’s warranty, and all warranty service is handled directly by the manufacturer. We do not manage or administer warranty claims on behalf of customers.

Warranty terms, coverage, and duration are set by each manufacturer. Issues involving defects, repairs, or replacements must be addressed with the manufacturer’s support team. When available, the warranty period is listed on the product page. If it is not shown, contact us or the manufacturer for details before purchasing.

To start a claim, the customer must contact the manufacturer and follow their process. Keep your proof of purchase and original packaging, and register the product if the manufacturer requires it, as these are often needed for warranty service.

We are happy to help you find the right contact or documentation, but we cannot decide outcomes or intervene in claim resolutions. For guidance, email cs@qualityboatparts.com.