{"product_id":"qbp998869","title":"Raymarine SeaTalk 1 to SeaTalkNG Spur Female Adaptor Cable, 3-Pin, For ST70-Series and E22158 Converter","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Raymarine SeaTalk 1 to SeaTalkNG spur female adaptor cable is a network adaptor for bringing legacy SeaTalk 1 data into a SeaTalkNG installation through a proper bridging device. It is used with ST70-series color instruments or the E22158 SeaTalk to SeaTalkNG converter, allowing older SeaTalk 1 information to be translated into modern SeaTalkNG and NMEA 2000 data.\u003c\/p\u003e\u003cp\u003eThis is not a general-purpose direct network joiner. It belongs in installations where an existing Raymarine SeaTalk 1 device or instrument group is being integrated during an electronics upgrade, with the bridge handling the protocol conversion. The range is available in 400 mm and 1 m lengths, so the installer can keep the run tidy behind a helm, nav station, instrument pod, or electronics panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects SeaTalk 1 equipment to a SeaTalkNG network through a supported bridging device.\u003c\/li\u003e\n\u003cli\u003eWorks with ST70-series color instruments or the E22158 SeaTalk to SeaTalkNG converter.\u003c\/li\u003e\n\u003cli\u003eSupports the movement of SeaTalk 1 information into SeaTalkNG and NMEA 2000 data through the bridge.\u003c\/li\u003e\n\u003cli\u003eFemale adaptor cable format for legacy SeaTalk 1 connections.\u003c\/li\u003e\n\u003cli\u003eAvailable in 400 mm and 1 m cable lengths for different helm and panel layouts.\u003c\/li\u003e\n\u003cli\u003eUseful when refitting a boat that still has working Raymarine SeaTalk 1 instruments but is moving toward a newer SeaTalkNG backbone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis adaptor cable is offered in two cable lengths for different installation layouts.\u003c\/p\u003e\u003cp\u003eThe connection purpose remains the same across the range: both variants are SeaTalk 1 to SeaTalkNG spur female adaptor cables for use with a supported bridging device. The only variant option shown here is cable length.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA06047: Cable length 400 mm. This shorter cable suits compact helm backs, instrument pods, and installations where the bridge sits close to the legacy SeaTalk 1 connection.\u003c\/li\u003e\n\u003cli\u003eA06073: Cable length 1 m. This longer cable gives more routing room when the converter, display, or network junction is mounted farther away inside a console or electronics panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan this cable as part of the bridge connection, not as a standalone conversion cable. The SeaTalk 1 side connects to the legacy equipment side, while the SeaTalkNG side is used with the supported Raymarine bridge or ST70-series instrument arrangement that performs the data translation.\u003c\/p\u003e\u003cp\u003eBefore closing up the panel, check that the cable length leaves a service loop without forcing a tight bend at the connector. On small boats and sailboat instrument pods, the 400 mm option can reduce excess cable. On larger helms or refit panels, the 1 m option gives more room to route around bus bars, mounting frames, and other electronics.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boat owners and installers keeping functional SeaTalk 1 instruments while adding or maintaining a SeaTalkNG network. It is most relevant on Raymarine refits where older depth, speed, wind, or instrument data needs to reach newer displays or networked equipment through a supported converter.\u003c\/p\u003e\u003cp\u003eConfirm the system uses a compatible bridging device before ordering. Standard SeaTalkNG and NMEA 2000 networks do not translate SeaTalk 1 data on their own, so the correct converter or ST70-series bridge is the key part of the installation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"400mm","offer_id":52581981978805,"sku":"QBP998869-V1","price":44.99,"currency_code":"USD","in_stock":true},{"title":"1m","offer_id":52581982011573,"sku":"QBP998869-V2","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335166_qbp998869.webp?v=1780202027","url":"https:\/\/www.qualityboatparts.com\/products\/qbp998869","provider":"Quality Boat Parts","version":"1.0","type":"link"}