{"product_id":"qbp997785","title":"Garmin Bail Mount with Quick-Release Cradle, 12-Pin, For ECHOMAP Plus 92sv-95sv\/97sv and ECHOMAP UHD 92sv-95sv","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12673-03 is a bail mount with a quick-release cradle for ECHOMAP Plus 9xsv chartplotter and sonar combo displays that use the 12-pin connection. It surface-mounts on a dash, console, or electronics box and lets you tilt the screen with the side knobs so the viewing angle stays comfortable from the helm.\u003c\/p\u003e\u003cp\u003eThe 12-pin cables plug into the cradle on the mount, so the display can be seated and removed without having to unplug and re-plug the connectors at the back of the unit. That setup is handy on boats that get covered, trailered, or stored where you prefer to pull the display after each trip.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface bail mount style with side knobs so the display can be tilted for glare control and sightlines at the helm.\u003c\/li\u003e\n\u003cli\u003eQuick-release cradle built around the 12-pin connection so cables stay with the mount while the display comes on and off.\u003c\/li\u003e\n\u003cli\u003eMade for Garmin ECHOMAP Plus 9xsv units that use a 12-pin connector, helping avoid mix-ups with other connector styles.\u003c\/li\u003e\n\u003cli\u003eMounting format suits flat dash and console installations where a fixed bracket is preferred over a flush-mount kit.\u003c\/li\u003e\n\u003cli\u003eReduces repeated plugging and unplugging at the back of the display when you remove the unit between trips.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is used with Garmin ECHOMAP Plus 9-inch xsv models including 92sv, 93sv, 94sv, 95sv, and 97sv, plus ECHOMAP UHD 9-inch models including 92sv, 93sv, 94sv, and 95sv, when the unit uses the 12-pin power and sonar connector. Before ordering, confirm your display and cable set are the 12-pin version, since Garmin offers similar mounts for other connector types.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan for a flat mounting surface with enough clearance to tilt the screen through its range without hitting a windshield frame, throttle binnacle, or compass. On fiberglass and thin panels, backing the fasteners with a plate or large washers helps keep the bracket solid when the boat is running in chop.\u003c\/p\u003e\u003cp\u003eRoute the 12-pin cable bundle to the cradle with a gentle bend and a little service loop, then secure the run so the connector area is not carrying the weight of the cable. Once the cables are seated in the cradle, daily removal is typically just the display coming off the mount.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup fits coastal cruising, fishing, and day-boat layouts where the chartplotter lives at the helm but comes off for security or weather protection. It also works well when you want the wiring to stay put behind the console while the display is stored in a dry place between outings.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269357170869,"sku":"QBP997785","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299140_qbp997785.jpg?v=1771543544","url":"https:\/\/www.qualityboatparts.com\/products\/qbp997785","provider":"Quality Boat Parts","version":"1.0","type":"link"}