{"product_id":"qbp994407","title":"Lumitec Mantis Underwater Dock Light Kit, 3-Light, RGBW, 10-30VDC, 6000 lm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101525 is a Mantis underwater dock lighting system with 2,000-lumen output, full-color RGBW control, and a 6500K white setting.\u003c\/p\u003e\u003cp\u003eIt is meant for fully submerged mounting on dock pilings or seawalls, putting usable light right at the slip face for nighttime tie-ups, ladder visibility, and general dockside awareness after dark.\u003c\/p\u003e\u003cp\u003eEach Mantis dock lighting kit supports up to four lights on a single system. A standard setup starts as a three-light package and can be expanded by adding one additional light, with a four-light maximum per kit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRGBW full-color output plus a 6500K white mode for white light that reads clean in clear water\u003c\/li\u003e\n\u003cli\u003e2,000-lumen output to light up pilings, seawalls, and the waterline zone around a slip\u003c\/li\u003e\n\u003cli\u003eSystem capacity of up to 4 lights per kit; additional kits are used when more than 4 lights are needed\u003c\/li\u003e\n\u003cli\u003eZip-Mount ties, mounting hardware, and cabling support a tidy install with secure fastening and straightforward routing\u003c\/li\u003e\n\u003cli\u003eBuilt for underwater dock-side placement where spray, washdown, and marine growth are part of normal use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the light spacing so the beams overlap without hot spots, then mount the fixtures to the piling or seawall at a consistent depth. Keep cable runs protected from chafe at edges and hardware, and route everything to a dry service area where connections can stay out of standing water.\u003c\/p\u003e\u003cp\u003eOn working docks, mount with enough clearance to avoid routine impacts from fenders, floating debris, and lines. Leave a small service loop where practical so a fixture can be pulled for cleaning without re-running the entire cable.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThese lights are used on low-voltage DC systems. Confirm your supply, switching, and any control hardware match the Mantis system requirements before finalizing the wiring path. Use marine-grade practices for overcurrent protection, strain relief, and keeping splices and terminations in a dry, accessible location.\u003c\/p\u003e\u003ch6\u003eUse cases on the dock\u003c\/h6\u003e\u003cp\u003eThis system fits owners and dock managers who want controllable color lighting for ambience and a strong white setting for task lighting at night. It is also a good match for slips where you want the waterline and pilings lit up for safer returns after sunset.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eLike any submerged fixture, performance stays best with periodic cleaning. Wipe the lens and housing as needed to remove growth and film, and inspect cable routing for abrasion after storms or heavy use.\u003c\/p\u003e\u003ch6\u003eImportant notice\u003c\/h6\u003e\u003cp\u003eThis product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268967198901,"sku":"QBP994407","price":1841.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298205_qbp994407.jpg?v=1771541110","url":"https:\/\/www.qualityboatparts.com\/products\/qbp994407","provider":"Quality Boat Parts","version":"1.0","type":"link"}