{"product_id":"qbp976069","title":"Garmin STRIKER 4 GPS Fishfinder, 4-Pin CHIRP 77\/200 kHz Transducer, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01550-00 is a GPS fishfinder with a 3.5 in color display (480 x 320) and traditional CHIRP sonar using the included 77\/200 kHz 4-pin transducer. It is rated IPX7 for water exposure at the helm and runs on 10 to 20 V DC.\u003c\/p\u003e\u003cp\u003eOn the water, it lets you mark waypoints where fish are holding, record tracks, and navigate back using the waypoint map. It also includes a flasher view for vertical jigging and an on-screen speed readout to help keep trolling speed consistent.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3.5 in HVGA color display with 480 x 320 resolution\u003c\/li\u003e\n\u003cli\u003eIncluded dual-beam CHIRP 77\/200 kHz transducer (4-pin) with a 20 ft cable for typical helm-to-transom runs\u003c\/li\u003e\n\u003cli\u003e200 W RMS transmit power (1,600 W peak-to-peak) with a maximum rated depth of 1,600 ft in freshwater and 750 ft in saltwater\u003c\/li\u003e\n\u003cli\u003eBuilt-in GPS with waypoint map, supporting up to 5,000 waypoints, 50 tracks, and 100 routes\u003c\/li\u003e\n\u003cli\u003eSonar history rewind and Smooth Scaling graphics so you can scroll back and mark a spot you passed over\u003c\/li\u003e\n\u003cli\u003eBuilt-in flasher view plus speed display for trolling, jigging, and stationary fishing\u003c\/li\u003e\n\u003cli\u003e12 V boat wiring with a recommended 3 A fuse; max current draw 1 A within the 10 to 20 V DC input range\u003c\/li\u003e\n\u003cli\u003eMounting support for tilt\/swivel bracket or flush mounting, with an IPX7-rated housing for spray and washdowns\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSTRIKER 4 display unit\u003c\/li\u003e\n\u003cli\u003eDual-beam 77\/200 kHz transducer (4-pin)\u003c\/li\u003e\n\u003cli\u003eTransom mount and trolling motor mount hardware for the transducer\u003c\/li\u003e\n\u003cli\u003eTilt\/swivel mounting bracket\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the display where you can see it while running and fishing, and keep it at least 25 cm (9.84 in) from a magnetic compass. If you flush-mount, confirm you have clearance behind the panel for the connectors and cable bend radius.\u003c\/p\u003e\u003cp\u003ePower is a straightforward two-wire hookup on most 12 V boats. Protect the circuit with a 3 A fuse, keep connections clean and dry, and route the power lead away from ignition wiring and other high-current conductors when possible. On 24 V systems, use a DC-DC converter to supply clean 12 V power within the 10 to 20 V DC input range.\u003c\/p\u003e\u003cp\u003eThe included transducer can mount on the transom or a trolling motor. A clean installation with the correct transducer height, solid bracket attachment, and a protected cable route is what makes the sonar perform well at idle and on plane.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit uses a 4-pin transducer connection and comes with the matching transducer, mounts, and cable. The on-screen map is a waypoint map that shows your position in relation to saved waypoints and recorded tracks.\u003c\/p\u003e\u003cp\u003eWaypoints and routes can be shared between compatible STRIKER and echoMAP devices by connecting the blue (Tx) and brown (Rx) wires in the power cable and enabling user data sharing in the menu. When sharing is not used, those wires can be left disconnected.\u003c\/p\u003e\u003ch6\u003eUse notes\u003c\/h6\u003e\u003cp\u003eThis is a good match for skiffs, bass boats, small center consoles, and kayaks that have a 12 V accessory battery and want sonar plus GPS marking without moving up to a larger display. Depth performance depends heavily on transducer placement, bottom type, and water conditions, so take the time to dial in the transducer install if you fish offshore or in deeper water.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt spray off the display and transducer after a trip and keep the transducer face free of growth. Periodically check the transducer bracket hardware and cable tie points for loosening from vibration.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269237928117,"sku":"QBP976069","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298988_qbp976069.jpg?v=1771542703","url":"https:\/\/www.qualityboatparts.com\/products\/qbp976069","provider":"Quality Boat Parts","version":"1.0","type":"link"}