{"product_id":"qbp951618","title":"i2Systems LightLink LED Dimming Module, For Apeiron PRO, 9-36V DC, Momentary Switch, Tri-Color","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe i2Systems LL-101-PRO is a LightLink Pro LED dimming module that lets you control compatible i2Systems Apeiron PRO fixtures from a normally open momentary switch on 9-36V DC systems.\u003c\/p\u003e\u003cp\u003eA quick press toggles the lights on and off, and a press-and-hold runs the dimming cycle while the switch is held. On 2- and 3-color capable fixtures, double-click selects color 2 and triple-click selects color 3. After a power loss, it recalls the last intensity and LED color so the lighting returns the way it was set.\u003c\/p\u003e\u003cp\u003eThe module draws up to 50 mA at 24V DC and provides a low-current dimming output (up to 36V DC, 50 mA), so it is intended for fixture dim\/control wiring rather than switching the main lighting load. The unit is fully potted and specified for dry or damp locations, with an operating range of -20 to 50 C and up to 95% non-condensing humidity.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRuns on 9-36V DC, which fits typical 12V and 24V boat systems\u003c\/li\u003e\n\u003cli\u003eMomentary switch control: press for on and off, press-and-hold for dimming (switch not included)\u003c\/li\u003e\n\u003cli\u003eTri-color control for compatible fixtures: double-click for color 2, triple-click for color 3\u003c\/li\u003e\n\u003cli\u003eNon-volatile memory restores the last intensity and LED color after power is restored\u003c\/li\u003e\n\u003cli\u003eFully potted module suited to dry or damp mounting areas\u003c\/li\u003e\n\u003cli\u003eLow-current design: up to 50 mA draw at 24V DC and a dim output rated up to 36V DC, 50 mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis dimmer module is intended for i2Systems Apeiron PRO fixtures that accept a LightLink dim\/control input, including fixtures with 2- and 3-color capability when color selection is needed. It supports 9-36V DC supply, which covers most 12V and 24V installations without needing a separate regulator.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module in a serviceable spot where it stays dry or only sees occasional damp air, such as behind a helm panel, inside a cabin overhead, or in a protected console space. A normally open momentary switch is used for control, and additional momentary switches can be wired in parallel to operate the same lighting circuit from more than one location.\u003c\/p\u003e\u003cp\u003eSince this is low-level control wiring, keep connections tight and protected from corrosion, and route control leads thoughtfully to avoid electrical noise from high-current runs when possible. Verify that your fixtures are dimmable and that the dim\/control lead is landed to the correct input on the lighting circuit.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis module is a good match for boats that want simple lighting control without adding a dedicated multi-button keypad. It works well for cabins, salons, pilot houses, and cockpits where you want quick on and off control plus smooth dimming, and it is especially useful on multi-color fixtures where red or a third color is used for night running and watchstanding.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eLL-101-PRO dimming module with 5 wire leads\u003c\/li\u003e\u003c\/ul\u003e","brand":"i2Systems","offers":[{"title":"Default Title","offer_id":52268967657653,"sku":"QBP951618","price":122.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298332_qbp951618.jpg?v=1771541115","url":"https:\/\/www.qualityboatparts.com\/products\/qbp951618","provider":"Quality Boat Parts","version":"1.0","type":"link"}