{"product_id":"qbp951449","title":"Raymarine i50 Depth Instrument, 12V, IPX6, NMEA 2000 Compatible","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine i50 Depth is a dedicated depth instrument display for boats that need clear water-depth information at the helm, nav station, or cockpit. It shows real-time depth, minimum and maximum depth, and a depth trend indicator, with audible alarms for shallow water, deep water, and anchor watch use.\u003c\/p\u003e\u003cp\u003eThe display uses a high-contrast monochrome LCD with red backlighting and large digits for easier reading in daylight or at night. It runs on 12 V dc systems with a 10 V dc to 16 V dc operating range, draws less than 1 W in typical display-only use, and carries an IPx6 waterproof rating for exposed marine locations.\u003c\/p\u003e\u003cp\u003eWith a compact 110 mm x 115 mm x 44 mm footprint, the i50 Depth suits smaller powerboats, sailboats, yachts, and RIBs where panel space is limited but a dedicated depth readout still matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDisplays current depth plus minimum depth, maximum depth, and depth trend information.\u003c\/li\u003e\n\u003cli\u003eAudible alarms cover shallow water, deep water, and anchor watch situations.\u003c\/li\u003e\n\u003cli\u003eHigh-contrast monochrome LCD with red backlighting helps readability in bright sun and low-light running.\u003c\/li\u003e\n\u003cli\u003eSeaTalkng network-ready, with compatibility for NMEA 2000 and legacy SeaTalk systems when properly connected.\u003c\/li\u003e\n\u003cli\u003eBuilt-in depth transducer interface lets the display operate as a master depth instrument when connected to a suitable transducer.\u003c\/li\u003e\n\u003cli\u003e12 V dc operation with a 10 V dc to 16 V dc operating range fits common onboard electrical systems.\u003c\/li\u003e\n\u003cli\u003eIPx6 waterproof rating supports use at exposed helm and cockpit locations.\u003c\/li\u003e\n\u003cli\u003eSurface mounting is supported, with an optional trunnion mounting kit available for installations that require bracket mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range is offered in two configurations: a display-only option and a pack that adds a through-hull depth transducer.\u003c\/p\u003e\u003cp\u003eBoth configurations are based on the i50 Depth instrument display. The pack configuration adds the P319 depth through-hull transducer for installations that need a new hull-mounted depth sensor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eE70059: Display only. This configuration suits installations where a compatible depth transducer or network depth source is already in place.\u003c\/li\u003e\n\u003cli\u003eE70148: Pack with through-hull transducer. This configuration includes the i50 Depth display with a P319 depth through-hull transducer for a more complete new installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe i50 Depth can be installed as a stand-alone depth display or added to a Raymarine instrument network. Its two SeaTalkng connections support network integration, while the transducer connection allows direct input from a compatible depth transducer.\u003c\/p\u003e\u003cp\u003eThe front-mounted format helps with panel installation, and the compact footprint is useful when replacing older instruments or fitting a new display into a crowded helm panel. Before installation, the available panel depth, power feed, network layout, and transducer location should be checked against the boat’s existing setup.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis instrument is a practical match for skippers who want a dedicated depth readout without depending on a larger multifunction display for every glance at the water below the hull. It is especially useful for coastal cruising, anchoring, marina approaches, and shallow-water navigation where quick depth awareness matters.\u003c\/p\u003e\u003cp\u003eFor boats already using Raymarine instruments, the i50 Depth fits naturally into a mixed helm display layout and can share brightness control with compatible products for a cleaner night-running setup.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Display Only","offer_id":52581982765237,"sku":"QBP951449-V1","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Pack With Through Hull Transducer","offer_id":52581982798005,"sku":"QBP951449-V2","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335181_qbp951449.webp?v=1780202037","url":"https:\/\/www.qualityboatparts.com\/products\/qbp951449","provider":"Quality Boat Parts","version":"1.0","type":"link"}