{"product_id":"qbp950761","title":"Simrad GO7 XSR 7in Fishfinder\/Chartplotter, Active Imaging 3-in-1 Transducer, C-MAP DISCOVER Chart","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 055-14838-001 is a remanufactured GO7 XSR 7-inch touchscreen chartplotter and fishfinder package that includes an Active Imaging 3-in-1 transducer and a C-MAP Discover chart card. The display runs at 800x480 resolution with 1200 nits of brightness, and it powers from 10 to 17 V DC with a recommended 3A fuse. The housing is rated IPX6 and IPX7 for spray, rain, and washdowns at the helm.\u003c\/p\u003e\u003cp\u003eOn the navigation side, it has an internal GPS receiver with a 10 Hz update rate and 32 channels, plus a microSD slot for charts and updates. For system integration, there is a NMEA 2000 Micro-C port for networked data and an Ethernet connection for compatible radar and other supported accessories. Built-in Wi-Fi and Bluetooth make it easy to mirror the screen to a phone or tablet and handle updates through an onboard hotspot.\u003c\/p\u003e\u003cp\u003eThis setup fits boats where space is tight but you still want one screen for charting, depth, and structure detail, such as center consoles, bay boats, and smaller cruisers that run inshore and nearshore.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e7-inch touchscreen display with 800x480 resolution and 1200 nits brightness for visibility in direct sun\u003c\/li\u003e\n\u003cli\u003ePower input 10 to 17 V DC, typical draw 12 W, max 20 W, with a recommended 3A fuse\u003c\/li\u003e\n\u003cli\u003eIPX6\/IPX7 water rating for exposed helm installs\u003c\/li\u003e\n\u003cli\u003eBuilt-in GPS receiver with 10 Hz update rate and 32-channel tracking\u003c\/li\u003e\n\u003cli\u003eActive Imaging 3-in-1 transducer included, combining CHIRP (83\/200 kHz), SideScan and DownScan (455\/800 kHz) in one transducer\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 Micro-C networking for sharing data and receiving AIS targets over the network\u003c\/li\u003e\n\u003cli\u003eEthernet (5-pin yellow connector) for compatible radar connectivity, plus internal Wi-Fi and Bluetooth\u003c\/li\u003e\n\u003cli\u003eBracket or panel mount capable, with a 197 x 141 x 82.7 mm footprint (no bracket) and 1.32 kg weight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGO7 XSR multifunction display (remanufactured)\u003c\/li\u003e\n\u003cli\u003eC-MAP Discover chart card\u003c\/li\u003e\n\u003cli\u003eActive Imaging 3-in-1 transducer\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003cli\u003eSuncover\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so the touchscreen can be reached safely from the helm and stays readable when you are standing. The unit supports bracket mounting for easy access and panel mounting for a cleaner dash install. Allow room behind the panel for the 82.7 mm depth and for cable bends without stressing connectors.\u003c\/p\u003e\u003cp\u003eWire it to a clean 12 V DC supply (10 to 17 V DC operating range) and protect the circuit with the recommended 3A fuse. Even with the IPX6\/IPX7 rating, it helps to route cables with drip loops and keep connections out of standing water inside the console.\u003c\/p\u003e\u003ch6\u003eNetwork and expansion\u003c\/h6\u003e\u003cp\u003eThe NMEA 2000 Micro-C port lets the display share and receive common onboard data such as GPS position, heading sources, engine information, and AIS targets when those devices are on the same backbone. Wi-Fi can also be used to export NMEA 0183 data for compatible apps and integrations, which is useful when bridging older gear or software into a newer helm.\u003c\/p\u003e\u003cp\u003eThe Ethernet connection supports compatible radar installations and certain supported accessories. If you are building out a system over time, this display gives you a straightforward path from standalone navigation to a networked helm.\u003c\/p\u003e\u003ch6\u003eSonar on the water\u003c\/h6\u003e\u003cp\u003eWith the included Active Imaging 3-in-1 transducer, you get a traditional CHIRP view along with SideScan and DownScan for reading structure, edges, and bait holding areas. For best results, mount the transducer where it stays in clean water flow at speed, and keep the cable run protected from abrasion inside the rigging tube or chase.\u003c\/p\u003e\u003cp\u003eThe display also supports CHIRP, DownScan, and ForwardScan sonar functions when paired with compatible transducers, so it can grow with the way you fish and cruise.\u003c\/p\u003e\u003ch6\u003eCharts and route planning\u003c\/h6\u003e\u003cp\u003eThe included C-MAP Discover chart card adds detailed vector charting with features like tides and currents, custom depth shading, and high-resolution bathymetry where available. The GO7 XSR also supports other optional cartography choices, which helps when you travel between regions or prefer a specific chart ecosystem for your local waters.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269691732149,"sku":"QBP950761","price":599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300985_qbp950761.jpg?v=1771545256","url":"https:\/\/www.qualityboatparts.com\/products\/qbp950761","provider":"Quality Boat Parts","version":"1.0","type":"link"}