{"product_id":"qbp947097","title":"Garmin NMEA 2000 Weather Cap, Micro Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10817-01 is a weather cap that covers an exposed NMEA 2000 cable connector to help keep moisture, salt spray, and debris off the contacts when the plug is not mated.\u003c\/p\u003e\u003cp\u003eOn boats, NMEA 2000 connectors often live behind the helm, inside console cavities, and in other spots that stay damp and collect grime. Capping unused connectors keeps the network cleaner and helps avoid the intermittent issues that can show up when pins get contaminated.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eProtects an unused NMEA 2000 cable connector from water intrusion, salt buildup, and dirt\u003c\/li\u003e\n\u003cli\u003eHelps keep connector pins cleaner during troubleshooting, upgrades, and seasonal storage\u003c\/li\u003e\n\u003cli\u003eQuick to install and remove without tools, so it is easy to keep up with routine service work\u003c\/li\u003e\n\u003cli\u003eUseful for spare drop cables, temporary disconnects, or future expansions where a plug may sit exposed\u003c\/li\u003e\n\u003cli\u003eMaintains a cleaner NMEA 2000 network environment in high-humidity and saltwater setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDry the connector and wipe off any salt residue before installing the cap. Press the cap onto the exposed connector until it is fully seated, then leave it in place until the connection is made again.\u003c\/p\u003e\u003cp\u003eIf the connector has already been exposed for a while, cleaning the pins and threads first makes a noticeable difference in how well everything seats and stays protected.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cap is intended for NMEA 2000 cable connectors on marine networks. It is a protective cover, not a network terminator, and it does not replace the required termination at the ends of a backbone.\u003c\/p\u003e\u003cp\u003eIf your system uses a different connector style for other Garmin cabling, match the cap to the connector type on the boat so it seats properly.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cap makes sense for any boat with an NMEA 2000 backbone where spare drops, extensions, or service leads may be left disconnected behind the dash or in an electronics locker. It is also handy when removing displays or sensors for winter storage and you want to leave the network wiring tidy and protected.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt off with fresh water when needed and let the cap dry before reusing it. Keeping the cap clean prevents grit from getting pushed into the connector when it is installed.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269656670389,"sku":"QBP947097","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300898_qbp947097.webp?v=1771545086","url":"https:\/\/www.qualityboatparts.com\/products\/qbp947097","provider":"Quality Boat Parts","version":"1.0","type":"link"}