{"product_id":"qbp945175","title":"Garmin GMR Fantom 12X Radar Pedestal, 120W, For 4 ft \u0026 6 ft Arrays, Pedestal Only","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01364-20 is an open-array radar pedestal for a GMR Fantom 12X system that pairs with a GMR Fantom 4 ft or 6 ft radar array (array sold separately).\u003c\/p\u003e\u003cp\u003eIt runs on 10 to 32 Vdc for common 12 V and 24 V power systems, and it carries an IPX6 water rating for exposure to heavy seas and spray. Plan your installation around the pedestal weight of 15.8 kg (34.8 lb.) and the provided 15 m (49 ft 3 in.) power and 15 m (49 ft 3 in.) network cable lengths.\u003c\/p\u003e\u003cp\u003eRadar operation is handled from a compatible Garmin chartplotter over a Garmin BlueNet network or a Garmin Marine Network connection.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCompatible with GMR Fantom 4 ft and 6 ft open-array antennas\u003c\/li\u003e\n\u003cli\u003eInput voltage range: 10 to 32 Vdc\u003c\/li\u003e\n\u003cli\u003eWater rating: IEC 60529 IPX6\u003c\/li\u003e\n\u003cli\u003ePedestal weight: 15.8 kg (34.8 lb.)\u003c\/li\u003e\n\u003cli\u003ePower cable length: 15 m (49 ft 3 in.)\u003c\/li\u003e\n\u003cli\u003eNetwork cable length: 15 m (49 ft 3 in.)\u003c\/li\u003e\n\u003cli\u003eAntenna rotation speeds: 24 rpm and 48 rpm\u003c\/li\u003e\n\u003cli\u003eMaximum wind load rating: 80 kn\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pedestal is intended for the GMR Fantom open-array setup and is used with the matching 4 ft or 6 ft antenna. On the display side, it ties into a Garmin BlueNet network and can also be integrated into Garmin Marine Network systems, so it helps to confirm what network ports your chartplotter or network switch provides before you start pulling cables.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the pedestal on a rigid radar platform or hardtop structure and keep the base level so the antenna scans true. Route the power and network leads with drip loops and proper strain relief, and keep connectors supported so vibration does not work them loose over time.\u003c\/p\u003e\u003cp\u003eGrounding is part of the install. Run a 12 AWG copper ground wire from the pedestal ground point to an appropriate water ground and seal exposed hardware to slow down corrosion in saltwater environments. After wiring, power up the system and set the installed antenna size in the chartplotter radar installation settings.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe radar is intended to be powered from the boat battery within the 10 to 32 Vdc range, with an in-line fuse in the power lead. If your installation uses a voltage converter, keep it in the circuit and retain the required fusing. For longer runs, match wire gauge to the added distance and make any extensions with crimp connectors and heat-shrink so the splice stays watertight.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis pedestal fits boats already running Garmin chartplotters that want an open-array radar footprint for offshore runs, coastal cruising, or night approaches where longer range and clear target separation matter. It also makes sense for refits where the array is being replaced separately from the pedestal.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269045940405,"sku":"QBP945175","price":7099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299215_qbp945175.jpg?v=1771541603","url":"https:\/\/www.qualityboatparts.com\/products\/qbp945175","provider":"Quality Boat Parts","version":"1.0","type":"link"}