{"product_id":"qbp930664","title":"Attwood Marine Fender Cleat, 3-1\/2 in, 316 Stainless Steel, Retractable, 3\/4 in Max Line Opening","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 66502-1 is a retractable fender cleat built for securing fender lines while keeping deck hardware low when it is not in use. It measures 3-1\/2 in. long, 1-3\/16 in. wide, and has a maximum line opening of 3\/4 in., so it is sized for dedicated fender duty rather than general docking loads.\u003c\/p\u003e\u003cp\u003eThe pull-up layout gives you a clean tie-off point when you need it and drops back to a lower profile afterward. In the closed position it sits about 9\/16 in. above deck, rises to 1-3\/8 in. when open, and uses enhanced cast 316 stainless steel for good resistance to saltwater exposure around gunwales, side decks, and other washdown-prone areas.\u003c\/p\u003e\u003cp\u003eThis is a practical choice for boats that spend time in slips, come alongside docks often, or keep fenders rigged and ready. It also works well where deck space is limited and a full-size fixed cleat would take up more room than necessary.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRetractable pull-up cleat made specifically for fender lines\u003c\/li\u003e\n\u003cli\u003eEnhanced cast 316 stainless steel construction for marine environments\u003c\/li\u003e\n\u003cli\u003e3\/4 in. maximum line opening fits common fender line sizes\u003c\/li\u003e\n\u003cli\u003e3-1\/2 in. overall length and 1-3\/16 in. width suit tighter mounting areas\u003c\/li\u003e\n\u003cli\u003e1-7\/8 in. install depth helps confirm clearance below the mounting surface\u003c\/li\u003e\n\u003cli\u003e1-11\/16 in. mounting hole distance gives a clear reference before drilling\u003c\/li\u003e\n\u003cli\u003eLow 9\/16 in. closed height leaves less hardware standing proud on deck\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore cutting or drilling, confirm that the mounting area has 1-7\/8 in. of clear depth below the surface and that the 1-11\/16 in. mounting hole distance matches your layout. The compact body makes it easier to place along a gunwale or deck edge where space is already shared with rub rails, trim, or other hardware.\u003c\/p\u003e\u003cp\u003eBecause this is a fender cleat, placement matters. It makes the most sense where crew can reach the line easily while coming alongside and where the pull-up body can move freely without interference from adjacent fittings.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis cleat suits owners who want a dedicated tie point for fenders without leaving a taller fixed fitting in the walking area. It also pairs neatly with Attwood Neat Cleat hardware when matching deck hardware is part of the overall rigging plan.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52023522164917,"sku":"QBP930664","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329456_qbp930664.jpg?v=1780191847","url":"https:\/\/www.qualityboatparts.com\/products\/qbp930664","provider":"Quality Boat Parts","version":"1.0","type":"link"}