{"product_id":"qbp924911","title":"Garmin Threaded Power\/Data Cable, For ECHOMAP Ultra, 4-Pin, 6 ft, NMEA 0183 I\/O","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12938-00 is a 4-pin threaded power and data cable for compatible ECHOMAP Ultra chartplotter\/sounder combos. The harness is 6 ft (2 m) long and includes NMEA 0183 input\/output for basic data sharing with other onboard electronics.\u003c\/p\u003e\u003cp\u003eUse it for a new install when you want the wiring to stay tidy at the helm, or as a direct replacement when an existing cable has been cut, pinched, or pulled loose over time. The threaded collar helps keep the plug seated when the console is bouncing in chop.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6 ft (2 m) length for typical console and bracket mounts.\u003c\/li\u003e\n\u003cli\u003e4-pin threaded connection that stays locked in place once the collar is snugged down.\u003c\/li\u003e\n\u003cli\u003ePower and data in a single harness to reduce extra adapters behind the dash.\u003c\/li\u003e\n\u003cli\u003eNMEA 0183 input\/output for connecting to NMEA 0183 equipment.\u003c\/li\u003e\n\u003cli\u003eFits ECHOMAP Ultra 102sv, 106sv, 122sv, and 126sv displays.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable matches the 4-pin threaded power\/data port used on the ECHOMAP Ultra 102sv, 106sv, 122sv, and 126sv. If your unit uses a different plug style or pin count, it will not thread on or make contact, so it is worth checking the connector on the back of the display before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRun the cable with a drip loop behind the display, keep it away from sharp fiberglass edges, and secure it so the connector is not carrying the weight of the harness. Hand-tighten the threaded collar until it is snug.\u003c\/p\u003e\u003cp\u003eWhen tying into a switch panel or distribution block, use appropriate circuit protection and clean, corrosion-resistant terminations. Leaving a little service loop makes it easier to pull the display for updates or winter storage without stressing the plug.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe power leads connect to your boat's DC supply, while the NMEA 0183 input\/output lines can pass navigation data to other NMEA 0183 devices such as a VHF radio, AIS, or an autopilot that accepts NMEA 0183 sentences. Keep splices dry and accessible, and label both ends before closing up the dash.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for center consoles, bass boats, and multi-station rigs where the ECHOMAP Ultra display is mounted a short run from the power distribution point and you want NMEA 0183 available in the same harness.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269221413045,"sku":"QBP924911","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299289_qbp924911.jpg?v=1771542552","url":"https:\/\/www.qualityboatparts.com\/products\/qbp924911","provider":"Quality Boat Parts","version":"1.0","type":"link"}