{"product_id":"qbp916927","title":"Raymarine B45L Thru-Hull Depth Transducer, Bronze Housing, Fairing Block, 114 mm Stem, 22 mm Hole","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E26019-PZ is a B45 bronze long-stem through-hull depth transducer with a fairing block for Raymarine instrument systems. It sends an analog depth signal to compatible Raymarine depth displays and instrument interfaces, making it a practical fit for boats that need a fixed hull-mounted depth sensor rather than a transom-mounted option.\u003c\/p\u003e\u003cp\u003eThe bronze stem-mount body is suited for fiberglass and wood hulls, and the included fairing block can be cut to match hull deadrise up to 26°. Installation requires a 22 mm (7\/8 in) hull hole, with a 114 mm (4.5 in) stem length for this long-stem through-hull format.\u003c\/p\u003e\u003cp\u003eWith a 45 ft cable and 200 kHz depth operation, this transducer is well suited to cruising sailboats and powerboats where a clean underwater installation and dependable depth information matter for navigation, anchoring, fishing, and shallow-water awareness.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBronze through-hull, stem-mount body for fiberglass and wood hull installations.\u003c\/li\u003e\n\u003cli\u003eIncluded fairing block supports hull deadrise up to 26° and can be cut during installation for proper face alignment.\u003c\/li\u003e\n\u003cli\u003e22 mm (7\/8 in) hull hole requirement helps confirm fit before haul-out or yard work.\u003c\/li\u003e\n\u003cli\u003e114 mm (4.5 in) long stem suits installations where extra stem length is needed through the hull and fairing.\u003c\/li\u003e\n\u003cli\u003e45 ft cable gives practical routing length from the hull location to the instrument area.\u003c\/li\u003e\n\u003cli\u003e200 kHz depth operation for Raymarine depth instrument use.\u003c\/li\u003e\n\u003cli\u003eAnalog depth output for compatible Raymarine instrument systems and interfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis transducer is intended for Raymarine depth instrument installations that use an analog depth transducer input. It is commonly paired with Raymarine ST60+, ST290, i40 Depth, i50 Depth and iTC-5 based systems. ST70 installations require the matching ST70 Depth Pod, sold separately.\u003c\/p\u003e\u003cp\u003eFit should be checked against the vessel hull material, available inside-hull clearance, cable route and instrument interface before installation. Because this is a through-hull transducer, the installation location needs clean water flow, room for the fairing block and safe access inside the hull for securing and servicing the assembly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the job as a hauled-out through-hull installation. The fairing block is used to help keep the transducer face aligned with the water flow, which is especially important on hulls with deadrise and on boats that run at different speeds or heel under sail.\u003c\/p\u003e\u003cp\u003eRoute the 45 ft cable away from sharp edges, high-heat areas and heavy electrical interference where possible. Final connection should match the Raymarine instrument or interface being used, especially on mixed older and newer instrument systems.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eThe bronze housing is a good match for underwater service on fiberglass and wood hulls, where the unit will be exposed to saltwater, vibration and normal hull movement. The fairing block also helps manage water flow across the transducer face, which supports cleaner depth readings on cruising boats, fishing boats and coastal powerboats.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eB45 bronze long-stem through-hull depth transducer.\u003c\/li\u003e\n\u003cli\u003eFairing block.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023857578165,"sku":"QBP916927","price":324.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330881_qbp916927.jpg?v=1780192049","url":"https:\/\/www.qualityboatparts.com\/products\/qbp916927","provider":"Quality Boat Parts","version":"1.0","type":"link"}