{"product_id":"qbp904467","title":"Garmin Handlebar Mount, For GPSMAP 60 Series, Fits Up to 1 in Bars","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10454-00 is a handlebar mounting bracket that clamps to a round bar up to 1 inch (25.4 mm) in diameter, keeping a compatible Garmin handheld GPS where you can see it and grab it quickly. It is a simple mechanical mount with no wiring, so it works just as well on a small center console as it does on a tender, kayak, or a boat where you want the handheld off the dash and on a rail.\u003c\/p\u003e\u003cp\u003eOn board, this style of mount is commonly used on grab rails, pedestal rails, or other 1 inch tubing near the helm. The unit snaps in for use underway and can be removed when docking, trailering, or stowing gear to reduce exposure to theft, spray, and impact.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eClamps to round handlebars or rails up to 1 inch (25.4 mm) diameter\u003c\/li\u003e\n\u003cli\u003eSnap-in style bracket keeps a compatible handheld GPS secured while underway\u003c\/li\u003e\n\u003cli\u003eMounting position helps keep the handheld visible without taking up dash space\u003c\/li\u003e\n\u003cli\u003eTool-tightened install using the supplied mounting hardware\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConfirm the mounting location is a round bar or rail at or below 1 inch diameter, then position the bracket where the screen will be easy to read and the buttons can be reached with one hand. Use the supplied hardware to secure the clamp, tightening evenly so the bracket sits straight and does not rotate on the bar.\u003c\/p\u003e\u003cp\u003eAfter mounting, clip your handheld into place and check clearance through the full range of steering and throttle movement. If the bracket is exposed to regular spray, placing it where it gets some shelter can help reduce salt buildup around the clamp and release points.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bracket is meant for Garmin handheld units that use the matching snap-in interface for this style of handlebar mount. Before ordering, confirm your handheld model supports this mount style and that the back of the unit matches the snap-in pattern so it locks in cleanly and releases normally.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis mount is a good match for boaters who run a handheld GPS as a backup navigator, use a handheld on a tender, or want a removable setup that can move between the boat and shore. It also works well for skiffs and open cockpits where a handheld needs a secure spot without permanently dedicating dash space.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with fresh water after salt exposure and let it dry before stowing the handheld. Periodically check the clamp hardware for tightness, especially after rough runs or trailering, and keep the snap-in surfaces free of sand and grit so the unit seats and releases smoothly.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269017039029,"sku":"QBP904467","price":17.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298703_qbp904467.jpg?v=1771541477","url":"https:\/\/www.qualityboatparts.com\/products\/qbp904467","provider":"Quality Boat Parts","version":"1.0","type":"link"}