{"product_id":"qbp899660","title":"Attwood Marine Plastic Waste Deck Fill, For 38mm Hose, Scalloped Stainless Steel Cap","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 99202WS1 is a waste deck fill with a plastic neck and a stainless steel cap for boats that use a 38 mm sanitation hose. It is a non-vented fitting, uses a 54 mm deck cutout, and has an 85 mm cap diameter, so the key fit checks are hose size, deck opening, and the flange footprint on the surface of the deck.\u003c\/p\u003e\u003cp\u003eThis fitting is for waste service, not fuel or freshwater, and the cap is marked accordingly to help keep deck fills clearly identified. That matters on boats with more than one fill point, especially when fuel, water, and sanitation access points are grouped in the same area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWaste deck fill for sanitation pump-out systems.\u003c\/li\u003e\n\u003cli\u003e38 mm hose connection size for matching existing waste hose runs.\u003c\/li\u003e\n\u003cli\u003e54 mm deck cutout requirement for replacement planning or new installation.\u003c\/li\u003e\n\u003cli\u003e85 mm cap diameter for checking flange coverage at the deck surface.\u003c\/li\u003e\n\u003cli\u003ePlastic neck with a stainless steel cap.\u003c\/li\u003e\n\u003cli\u003eNon-vented body for systems where tank venting is handled through a separate vent line.\u003c\/li\u003e\n\u003cli\u003eWaste marking on the cap helps avoid confusion with fuel or water fills.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eOn a replacement job, the practical checks are straightforward: confirm the hose is 38 mm, measure the existing deck opening, and make sure the 85 mm cap will sit cleanly over the area on deck. It also helps to check clearance below the mounting point so the hose can run without a sharp bend right under the fitting.\u003c\/p\u003e\u003cp\u003eThis is a good match for cruisers, fishing boats, and sailboats with an onboard head and holding tank where you need a clearly marked waste pump-out point on deck. If your boat already has a separate tank vent and you are matching a non-vented waste fill in this size, this fitting lines up with that type of setup.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52581868765365,"sku":"QBP899660","price":61.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329230_qbp899660.webp?v=1780200957","url":"https:\/\/www.qualityboatparts.com\/products\/qbp899660","provider":"Quality Boat Parts","version":"1.0","type":"link"}