{"product_id":"qbp892661","title":"Vimar Surface-Mount Junction Box, IP56, 190 x 140 x 70 mm, Undrilled Walls, Blind Cover, Stainless Steel Screws, RAL 7035 Grey, 450 V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV55207 is an IP56-rated surface-mount junction box used to protect electrical connections in areas that see spray, washdowns, and general moisture on board. The enclosure measures 190 x 140 x 70 mm and comes in RAL 7035 grey, with a plastic body and a blind cover that fastens down with stainless steel screws.\u003c\/p\u003e\u003cp\u003eIt is rated with an insulation voltage (Ui) of 450 V and is specified for use from 0 C to 60 C. The walls are undrilled, so cable entries can be placed where they make sense for your run and finished with the right glands or conduit fittings to keep the seal intact.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP56 protection for spray and washdowns in exposed areas\u003c\/li\u003e\n\u003cli\u003eSurface-mount format for bulkheads, lockers, and panels\u003c\/li\u003e\n\u003cli\u003eUndrilled walls so cable entries can be placed where your wiring actually routes\u003c\/li\u003e\n\u003cli\u003eBlind cover secured with stainless steel screws\u003c\/li\u003e\n\u003cli\u003eOverall size: 190 x 140 x 70 mm\u003c\/li\u003e\n\u003cli\u003eRated insulation voltage (Ui): 450 V\u003c\/li\u003e\n\u003cli\u003eSpecified working temperature: 0 C to 60 C\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey finish for a neutral, low-visibility install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the box to a flat surface where the cover screws remain accessible for future inspections. Plan entry points before drilling, then use appropriate cable glands or conduit fittings sized for your cable and jacket so the seal is not compromised. Leave enough slack inside for service, keep splices or terminal blocks supported, and tighten the cover screws evenly so the gasket seats consistently.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a protective enclosure, so the electrical limits of your installation depend on the terminals, connectors, and cable you install inside it. The 450 V insulation rating suits many common on-board circuits, but it does not replace correct fuse or breaker sizing, proper strain relief, or good separation between DC and AC wiring where required. Confirm the footprint fits your mounting area and that you can route cables without sharp bends at the entry points.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis box is a good match when you are cleaning up exposed junctions on deck, in cockpit lockers, under hardtops, or around masts and radar supports where wiring needs protection from spray. It also works well during refits where cable routing is not standardized and you want the freedom to place entries exactly where the run dictates.\u003c\/p\u003e\u003ch6\u003eMaintenance and checks\u003c\/h6\u003e\u003cp\u003eAfter the first few outings, recheck gland tightness and confirm the cover gasket is seated properly. In saltwater use, a quick rinse and periodic inspection for grit around the seal helps maintain the IP rating over time.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269574389941,"sku":"QBP892661","price":29.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300611_qbp892661.jpg?v=1771544667","url":"https:\/\/www.qualityboatparts.com\/products\/qbp892661","provider":"Quality Boat Parts","version":"1.0","type":"link"}