{"product_id":"qbp891554","title":"Vimar IP55 Surface-Mount Junction Box, 190 x 140 x 70 mm, 10 Inlets, Stainless Steel Screws","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV55107 is an IP55 junction box for surface mounting when you need to protect wire splices and terminal connections in areas that see spray, washdowns, and humidity on board.\u003c\/p\u003e\u003cp\u003eIt is sized as 190 x 140 x 70 mm and uses a screwed lid held by stainless steel fasteners. Ten trimmable step-membrane inlets make it practical for bringing in multiple cables or 20\/25 mm conduit, while keeping the entry points snug once trimmed.\u003c\/p\u003e\u003cp\u003eThe housing is plastic in grey (RAL 7035), with a rated insulation voltage of 450 V and a working temperature range of 0 to 60 C. It is intended for wall or ceiling mounting and should be kept out of fully submerged locations such as bilges that hold standing water.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 protection for damp lockers, consoles, and exterior wiring points that get occasional spray.\u003c\/li\u003e\n\u003cli\u003eSurface-mount installation for wall or ceiling mounting.\u003c\/li\u003e\n\u003cli\u003eNominal size 190 x 140 x 70 mm.\u003c\/li\u003e\n\u003cli\u003eTen cable entries with trimmable step membranes to match the cable or conduit size.\u003c\/li\u003e\n\u003cli\u003eCover secured with stainless steel screws for better corrosion resistance around the fasteners.\u003c\/li\u003e\n\u003cli\u003eRated insulation voltage (Ui) 450 V.\u003c\/li\u003e\n\u003cli\u003eWorking temperature range 0 to 60 C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the box to a flat bulkhead or overhead where you can still access the lid screws for inspection later. When bringing cables through the step membranes, trim only as much as needed so the membrane stays tight on the jacket, and leave a drip loop on any cable that approaches from above.\u003c\/p\u003e\u003cp\u003eOn runs that see vibration, support cables close to the box so movement does not work the entries loose over time. Keep terminations and splices arranged so the lid closes without pinching conductors.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is commonly used as a junction point for lighting circuits, deck hardware feeds, or accessory wiring where a sealed, surface-mounted box keeps connections organized. It suits coastal cruisers and working boats that want protection from spray and humidity without needing a submersible enclosure.\u003c\/p\u003e\u003cp\u003eAs with any junction box, water resistance depends on clean cable jackets, correctly trimmed membranes, and an installation surface that lets the cover sit flat and tighten evenly.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eCheck the lid screws and the cable entries periodically, especially after heavy washdowns or if the box lives in a cockpit locker. If you open the box for service, wipe away any moisture, re-seat cables, and tighten the lid evenly so the cover stays square against the housing.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269611024565,"sku":"QBP891554","price":33.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300606_qbp891554.jpg?v=1771544842","url":"https:\/\/www.qualityboatparts.com\/products\/qbp891554","provider":"Quality Boat Parts","version":"1.0","type":"link"}