{"product_id":"qbp891044","title":"Vimar IP55 Surface-Mount Junction Box, 100x100x50mm, 6 Inlets, RAL 7035 Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV55104 is an IP55-rated surface-mount junction box for protecting wiring connections in areas exposed to spray, washdowns, and dust. It’s a practical choice when you need a sealed enclosure for cable splices on bulkheads, inside lockers, under consoles, or in other onboard spaces where wiring needs to stay contained and protected.\u003c\/p\u003e\u003cp\u003eThe housing is plastic in grey RAL 7035, with stainless steel screws, and it uses a blind cover secured by screws. Cable entry is handled through a trimmable step membrane so you can open the pass-through to match the cable route without leaving an oversized opening.\u003c\/p\u003e\u003cp\u003eOverall dimensions are 100 mm length, 128 mm width, and 56 mm depth. The unit is rated Ui 450 V and is specified for 0°C to 60°C operation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 protection for dust and water jets, suited for exposed onboard areas where spray and washdowns happen\u003c\/li\u003e\n\u003cli\u003eSurface mounting for walls and ceilings, useful on bulkheads, inside consoles, and in equipment lockers\u003c\/li\u003e\n\u003cli\u003eBlind cover with screw attachment to keep wiring secured and inaccessible during normal use\u003c\/li\u003e\n\u003cli\u003eTrimmable step membrane cable entry to size the pass-through to the cable route\u003c\/li\u003e\n\u003cli\u003ePlastic enclosure in grey RAL 7035 with stainless steel screws for better longevity around moisture\u003c\/li\u003e\n\u003cli\u003eRated insulation voltage Ui 450 V and operating temperature range 0°C to 60°C\u003c\/li\u003e\n\u003cli\u003eDimensions: 100 mm (L) x 128 mm (W) x 56 mm (D)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the box to a solid, flat surface so the cover seats evenly and the seal can do its job. For boats, that usually means a bulkhead, console interior, cockpit locker wall, or a sheltered area in the engine room where it won’t be submerged.\u003c\/p\u003e\u003cp\u003eUse the step membrane to create cable entries that match your cable size and routing. Keep entries tidy and avoid forcing oversized cables through undersized openings, since that can compromise the fit around the pass-through.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis junction box is a good match when you need a compact surface box for joining circuits like deck accessories, lighting feeds, pumps, or sensors, and you want added protection from spray and dust. It’s also useful during refits when you’re cleaning up older splices and want them contained in a closed enclosure rather than left in open loom or taped joints.\u003c\/p\u003e\u003cp\u003eIP55 helps in wet environments, but it is not meant for full immersion. Choose a mounting spot that stays above standing water and where the cover can be accessed later for inspection or troubleshooting.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269609943221,"sku":"QBP891044","price":10.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300603_qbp891044.jpg?v=1771544838","url":"https:\/\/www.qualityboatparts.com\/products\/qbp891044","provider":"Quality Boat Parts","version":"1.0","type":"link"}