{"product_id":"qbp888963","title":"Vimar Idea 2-Way Directional Push Button Switch, 2-Pole 10A 250V AC, Center-Off, White Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMP16155.B is a 2-pole, 2-way momentary push button module with directional arrows and a central OFF position, finished in white.\u003c\/p\u003e\u003cp\u003eIt is rated 10 A at 250 V~ and uses two change-over contacts across six terminals, which supports up\/down control logic in a compact, single-rocker format. The front is IP40, so it is intended for protected locations rather than exposed areas that see spray or washdowns.\u003c\/p\u003e\u003cp\u003eIn an onboard electrical system, this style of switch is commonly used as a control input for relays, contactors, or automation modules, especially when the load current should not run through a small panel switch.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMomentary ON-OFF-ON action with directional arrows for clear up\/down operation at the panel\u003c\/li\u003e\n\u003cli\u003e2-pole switching with two change-over contacts on six terminals for flexible control wiring\u003c\/li\u003e\n\u003cli\u003e10 A, 250 V~ rating for general switching and control circuits\u003c\/li\u003e\n\u003cli\u003eIP40 front protection for interior or sheltered console installations\u003c\/li\u003e\n\u003cli\u003eVimar IDEA modular format with snap-in fastening for flush-mounted frames and plates\u003c\/li\u003e\n\u003cli\u003eMatt white thermoplastic face with a label space and RAL 9001 color reference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis device mounts as a flush module and fastens by snapping into the matching IDEA support frame. Plan for the body depth behind the panel and route conductors so the module can seat fully without stressing the terminals.\u003c\/p\u003e\u003cp\u003eThe switching section provides six terminals. Before wiring, map the circuit so each direction is correct and the center position is OFF. For motors, windlasses, and actuators, this switch is typically used to drive a relay or contactor circuit so higher current stays in the power distribution side.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe module format is sized for the IDEA system and is approximately 24.8 mm wide, 50.1 mm tall, and 43.6 mm deep. It is intended to be used with compatible IDEA frames and cover plates; confirm the module count of your plate and the available clearance inside the console or bulkhead cavity.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis switch is a practical match for helm and cabin panels where you want an up\/down momentary command, such as trim tab control via a controller, raising and lowering an electric hatch through relays, or sending direction inputs to a lighting or automation module. It also fits well when you are matching existing Vimar IDEA styling across a refit.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the face with a soft, damp cloth and avoid harsh solvents that can haze thermoplastics. Periodically check that the module remains firmly engaged in the frame and that terminal screws are secure, especially in areas that see vibration.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269602078901,"sku":"QBP888963","price":39.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300574_qbp888963.jpg?v=1771544805","url":"https:\/\/www.qualityboatparts.com\/products\/qbp888963","provider":"Quality Boat Parts","version":"1.0","type":"link"}