{"product_id":"qbp888569","title":"Vimar LINEA EnOcean Radio Control, For 31506\/31506.2 Buttons, 4-Button, 868 MHz, Energy Harvesting, IP40, Flush-Mounted, 2 Modules","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM30502 is a LINEA-series EnOcean radio control with four push buttons that transmits on 868 MHz and powers itself through energy harvesting. Each press generates the energy needed to send the command, so there is no battery to service and no external power feed required at the control.\u003c\/p\u003e\u003cp\u003eThis is a wall control for an EnOcean system, not a load-switching device. It sends wireless commands to compatible EnOcean receivers, actuators, or gateways that do the actual switching or automation elsewhere in the boat.\u003c\/p\u003e\u003cp\u003eIt fits a flush-mounted LINEA position and takes up 2 modular spacings. The housing is rated IP40, which makes it a good match for protected interior locations such as the cabin, nav station, or inside a covered helm console.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEnOcean 868 MHz wireless transmitter for control of compatible EnOcean equipment\u003c\/li\u003e\n\u003cli\u003eEnergy-harvesting operation with a built-in electro-dynamic generator, so there is no battery to replace\u003c\/li\u003e\n\u003cli\u003eFour push buttons with four outputs for assigning multiple commands or scenes\u003c\/li\u003e\n\u003cli\u003eFlush-mounted format for Vimar LINEA installations, 2 modular spacings wide\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for dry, protected areas on board\u003c\/li\u003e\n\u003cli\u003eWireless control with no wired bus connection at the keypad\u003c\/li\u003e\n\u003cli\u003eOne-way radio transmission, so it does not provide status feedback at the control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis control is meant to be completed with dedicated buttons 31506 or 31506.2. It is intended for EnOcean systems that use the 868 MHz band, so confirm your receiver, actuator, or gateway is EnOcean-compatible on 868 MHz before ordering, especially if the vessel operates outside regions where 868 MHz is commonly used.\u003c\/p\u003e\u003cp\u003ePlan placement with the onboard environment in mind. IP40 is appropriate for interior panels and protected bulkheads, but it is not a good choice for exposed cockpit surfaces, washdown zones, or any location that sees spray.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit in a flush position that matches the LINEA 2-module format, then complete it with the correct dedicated buttons. System commissioning is handled at the receiving device, so pairing and function assignment depends on the EnOcean receiver or gateway you are using.\u003c\/p\u003e\u003cp\u003eFor the best radio performance on a boat, avoid burying the control behind large metal structures and test operation from the final mounting spot before closing up the panel.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for refits where you want wall-style control without pulling new wiring runs. It works well for cabin lighting control, courtesy light scenes, or triggering automation through an EnOcean gateway, as long as the actual switching hardware is installed elsewhere in the system.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners building an EnOcean-based smart control setup inside the vessel, and for installers who want a clean, flush wall control that does not add battery maintenance to the checklist.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eSince the control is self-powered, there are no batteries to monitor or replace. Keep it clean with a dry or lightly damp cloth and avoid letting moisture migrate into the mounting area through open console edges or washdowns.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269625606325,"sku":"QBP888569","price":138.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300562_qbp888569.jpg?v=1771544931","url":"https:\/\/www.qualityboatparts.com\/products\/qbp888569","provider":"Quality Boat Parts","version":"1.0","type":"link"}