{"product_id":"qbp879446","title":"Vimar Linea Classica 2P USA+EU Socket Outlet, For Flat and 4.8mm Pins, 15A, 250V, Polarized, Flush Mount, White Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM10194 is a socket outlet with a polarized 2P layout that accepts plugs with parallel and in-line flat pins as well as ø 4.8 mm pins. It is rated 15 A at 250 V~, which makes it a practical fit on boats where the onboard AC system and guest gear can show up with mixed plug formats.\u003c\/p\u003e\u003cp\u003eThis is a flush-mounted device in white with surface finishing that is matt and a surface protection that is untreated. The body measures 22 mm wide by 36 mm high, with 32.5 mm depth behind the panel, so you can check clearance in joinery, helm consoles, or cabin bulkheads before committing to the cutout and wiring.\u003c\/p\u003e\u003cp\u003eBecause it is a 2P outlet (no protective earth), it belongs on circuits and with equipment that do not require an earth connection. Confirm the receptacle style matches both your vessel’s AC distribution and the plugs you plan to use onboard.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P polarized socket that accepts plugs with parallel and in-line flat pins and ø 4.8 mm pins\u003c\/li\u003e\n\u003cli\u003eNominal rating: 15 A, 250 V~\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation for a clean panel finish\u003c\/li\u003e\n\u003cli\u003eThermoplastic body that is halogen-free\u003c\/li\u003e\n\u003cli\u003eSurface finishing is matt with an untreated surface protection\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit identification\u003c\/li\u003e\n\u003cli\u003eBody size: 22 mm (W) x 36 mm (H); 32.5 mm device depth\u003c\/li\u003e\n\u003cli\u003eNo hinged lid, so it suits protected locations away from spray\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is part of the Vimar LINEA Classica device family. It is best used when your boat already carries that system or you are building out a consistent Vimar installation with matching frames and cover plates in the same range.\u003c\/p\u003e\u003cp\u003eFor refits, compare the device dimensions to your existing opening, and allow extra room behind the panel for wire bends and terminal access. If the mounting location is near sinks, cockpit doors, or exterior washdowns, plan a protected placement since the outlet face is not covered by a lid.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis outlet is for AC circuits up to 250 V~ and should be installed on a properly protected branch circuit. Keep polarity correct during wiring since the outlet is polarized, and use the correct breaker and wire sizing for a 15 A circuit per your vessel’s electrical standards.\u003c\/p\u003e\u003cp\u003eOn boats, mixed plug acceptance is helpful at nav stations, salon charging corners, or guest cabins, but it does not convert voltage or plug type beyond physical pin compatibility. If there is any doubt about grounding requirements for the equipment you will connect, confirm the plug and circuit expectations before installation.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect the outlet face for heat discoloration, looseness, or corrosion from a humid environment, especially on vessels that see vibration and frequent shore power cycling. Clean with a lightly damp cloth and avoid solvent cleaners that can haze or soften thermoplastic surfaces.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269544243381,"sku":"QBP879446","price":7.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300360_qbp879446.jpg?v=1771544528","url":"https:\/\/www.qualityboatparts.com\/products\/qbp879446","provider":"Quality Boat Parts","version":"1.0","type":"link"}