{"product_id":"qbp876288","title":"Vimar 8000 1-Module Mounting Frame With Claws, 60 mm Round Box, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM08501 is a 1-standard-module mounting frame with claws for round ø 60 mm flush-mount boxes, used to secure Vimar 8000 series modular inserts behind a cover plate.\u003c\/p\u003e\u003cp\u003eIt mounts flush and can be oriented horizontally or vertically, which helps when the box is rotated or when the plate layout needs a specific direction. The insert mounts from the back side of the frame, so the front opening stays aligned for a clean finish.\u003c\/p\u003e\u003cp\u003eOn boats, this style of frame is common behind cabin and helm switching where European round boxes are used. It is a good match for refits where you are keeping the existing ø 60 mm box and updating the switching hardware on the Vimar 8000 platform.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits round ø 60 mm flush-mount boxes and holds one standard module\u003c\/li\u003e\n\u003cli\u003eClaw fastening grips the box wall for a secure seat without relying on mounting screws\u003c\/li\u003e\n\u003cli\u003eHorizontal or vertical mounting orientation to suit plate and box alignment\u003c\/li\u003e\n\u003cli\u003eBack-side mounting for the module insert to keep the front opening clean and centered\u003c\/li\u003e\n\u003cli\u003eThermoplastic frame in black for installations where the support should stay unobtrusive behind the plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is built around the Vimar 8000 series 1-module format and a round ø 60 mm flush box. Confirm that your installation uses a ø 60 mm round box and that the box is soundly fixed in the bulkhead or panel so the claws can bite evenly.\u003c\/p\u003e\u003cp\u003eIt is not intended for surface-mount boxes, DIN rail assemblies, or square North American style electrical boxes. If you are replacing an older support, match both the box diameter and the module format before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSeat the frame in the ø 60 mm flush box and align it to the plate orientation you want. Engage the claws so the frame sits flat and does not rock in the box, then install the 1-module insert from the back side and finish with the matching plate.\u003c\/p\u003e\u003cp\u003eOn a boat, take a moment to check clearance behind the panel for wiring bends and device depth, especially in thin liners and tight helm consoles where harnesses are often bundled close to the box.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis frame is typically used behind interior switching and outlets in protected locations such as cabins, heads, nav stations, and inside helm consoles. If the installation is in a spot that sees direct spray or washdowns, plan for appropriate protection at the cover and device level, since the frame itself is only the support for the modular insert.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine electrical checks, verify the plate sits flat and the insert has not shifted in the box. If you ever remove the device for service, re-seat the frame so the claws are evenly engaged before reassembling the plate.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269551386805,"sku":"QBP876288","price":5.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300337_qbp876288.jpg?v=1771544556","url":"https:\/\/www.qualityboatparts.com\/products\/qbp876288","provider":"Quality Boat Parts","version":"1.0","type":"link"}