{"product_id":"qbp875147","title":"Simrad SimNet Termination Plug","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 24005894 is a SimNet termination plug that finishes a SimNet network backbone so the bus stays stable and devices keep sharing data normally.\u003c\/p\u003e\u003cp\u003eIt has a built-in termination resistor and is intended for use at the end of a SimNet backbone. A proper backbone is terminated at both ends, so this is commonly used as one of the two end terminators on the network. The plug is IP66 rated, which suits typical helm and console installations where spray and washdowns happen.\u003c\/p\u003e\u003cp\u003eIt meets NMEA 2000 standards, making it a fit for SimNet-based NMEA 2000 networks that use SimNet cabling and connectors.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in termination resistor for correct SimNet backbone termination\u003c\/li\u003e\n\u003cli\u003eUsed at the ends of the network backbone (one terminator per end)\u003c\/li\u003e\n\u003cli\u003eIP66 rated sealing for exposure to spray and washdowns\u003c\/li\u003e\n\u003cli\u003eMeets NMEA 2000 standards for SimNet-based network installs\u003c\/li\u003e\n\u003cli\u003eSlim, plug-and-play terminator that connects directly to SimNet fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eShut down network power before changing backbone components. Identify the two physical ends of the SimNet backbone and fit a termination plug to each open backbone connector at those ends. If you extend the backbone, move the terminator to the new end point so the network remains terminated correctly.\u003c\/p\u003e\u003cp\u003eKeep terminators on the backbone ends, not on device drop leads. When a network acts intermittent, a missing terminator or a terminator placed on a drop cable is one of the first things to check.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis plug is for SimNet connector style networks. It is used on SimNet installations commonly found across Simrad, B\u0026amp;G, and Lowrance systems that are wired with SimNet backbone parts.\u003c\/p\u003e\u003ch6\u003eOn-board use notes\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits and expansions where a backbone gets opened up to add a chartplotter, autopilot components, AIS, sensors, or a gateway and the network needs to behave the same at the dock and underway. Keeping the backbone properly terminated helps prevent devices from dropping off the bus when the boat is vibrating or the electronics are under load.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e24005894\u003c\/span\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53765578260661,"sku":"QBP875147","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/0371992_qbp875147_jpeg.jpg?v=1794616560","url":"https:\/\/www.qualityboatparts.com\/products\/qbp875147","provider":"Quality Boat Parts","version":"1.0","type":"link"}