{"product_id":"qbp870402","title":"Vimar G5 Fluorescent Tube Lampholder, 250V 2A, 110C Rated, Snap Fixing, Screwless Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02405 is a snap-in lampholder for G5 fluorescent tubular lamps. It is rated 2 A and is suitable for continuous operating temperatures up to 110°C, which matters when the fixture sits in a warm headliner void or near other heat sources on board.\u003c\/p\u003e\u003cp\u003eThis is a service part used inside a light fitting, where it grips the two G5 pins and keeps the lamp seated even with vibration underway. Screwless terminals make it quick to re-terminate wiring without fighting tiny terminal screws.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFor G5 fluorescent tubular lamps\u003c\/li\u003e\n\u003cli\u003eSnap-fixing body for quick mounting in compatible fixtures\u003c\/li\u003e\n\u003cli\u003eScrewless terminals for rigid and flexible conductors from 0.5 mm² to 1 mm²\u003c\/li\u003e\n\u003cli\u003eRated current: 2 A\u003c\/li\u003e\n\u003cli\u003eRated operating temperature: up to 110°C (continuous)\u003c\/li\u003e\n\u003cli\u003eBrass contacts for stable electrical contact at the lamp pins\u003c\/li\u003e\n\u003cli\u003eWhite finish that blends into most interior light housings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is mainly about two things: the lamp base and the way the holder mounts into the fixture. This lampholder is for G5 tube pins and uses a snap-fixing style, so it needs a fixture designed for that mounting method.\u003c\/p\u003e\u003cp\u003eMany fluorescent fixtures use a lampholder at each end of the tube. If you are replacing a worn or heat-affected holder, it is worth checking the one on the opposite end for looseness or discoloration as well so the tube stays aligned.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eIsolate power to the light circuit and confirm it is dead before working in the fixture. Strip the conductor to a clean length and insert it fully into the screwless terminal, then do a gentle pull check to confirm it is locked.\u003c\/p\u003e\u003cp\u003eRoute wiring so it is supported and not tugging on the terminals when the boat pounds. Keep the lampholder inside the fixture where it is protected from direct spray and washdowns, and make sure the tube pins seat squarely into the contacts before closing the housing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis lampholder is a practical fix when an older fluorescent strip light in the cabin, galley, nav station, or a locker starts flickering due to a loose lamp connection. It is also useful during refits where you are keeping an existing fluorescent fixture body but renewing the internal wear parts.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine checks, look for signs of heat stress such as browning, brittleness, or a lamp that no longer fits snugly. If the tube feels loose in the ends or you see intermittent lighting when the boat vibrates, replacing the holder is often a straightforward way to restore a solid connection.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269498925237,"sku":"QBP870402","price":1.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300271_qbp870402.jpg?v=1771544290","url":"https:\/\/www.qualityboatparts.com\/products\/qbp870402","provider":"Quality Boat Parts","version":"1.0","type":"link"}