{"product_id":"qbp867520","title":"Garmin Montana 700 Series Marine Mount with Power Cable, Bare Wire Power Audio Data Leads","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12881-02 is a fixed marine mount with a hardwired power cable for installing a compatible handheld on a console, helm, or bulkhead where it stays put underway. The cable comes as bare wires for power, audio, and data connections, which helps when you are tying into existing boat wiring and want to avoid bulky plug adapters behind the panel.\u003c\/p\u003e\u003cp\u003eThis mount is called out for portrait use with Montana 700i and Montana 750i units. The mount body is listed at 4 in wide, 6 in high, and 3 in deep, with a matte black finish that fits in with common dash layouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed mount format for a clean, hard-installed location at the helm or nav station.\u003c\/li\u003e\n\u003cli\u003ePower cable with bare-wire leads for power, audio, and data connections.\u003c\/li\u003e\n\u003cli\u003ePortrait-oriented mounting support noted for Montana 700i and Montana 750i devices.\u003c\/li\u003e\n\u003cli\u003eListed mount dimensions of 4 in (W) x 6 in (H) x 3 in (D) for clearance planning.\u003c\/li\u003e\n\u003cli\u003eMatte black finish that keeps the installation visually low-profile on most consoles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMarine mount\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003ePower cable with bare-wire leads for power, audio, and data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it on a flat, rigid surface where the screen is easy to see and the cable can be routed without sharp bends. If the cable passes through fiberglass, metal, or a cutout edge, add chafe protection and support the run so vibration does not work the wiring loose over time.\u003c\/p\u003e\u003cp\u003eTerminate the bare wires at your vessel’s DC distribution and any audio or data interface you are using. Leaving a small service loop behind the mounting location makes future removal and re-termination easier without pulling new wire.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm device compatibility before ordering, especially if you are swapping from a different cradle or mounting location. It helps to check the available panel depth for the cable exit and any strain relief so the mount sits flat and the wiring stays protected behind the console.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis mount is a good match for boats that run a compatible Garmin handheld as a primary navigator at the helm and want a consistent power connection for long days on the water. It also fits setups where the handheld is used for planning below and then moved to the cockpit for navigation and track recording while underway.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269259030709,"sku":"QBP867520","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299518_qbp867520.jpg?v=1771542884","url":"https:\/\/www.qualityboatparts.com\/products\/qbp867520","provider":"Quality Boat Parts","version":"1.0","type":"link"}